AutomationDirect has added Endress+Hauser Cerabar series pressure transmitters to their growing lineup of process control and measurement devices. Endress+Hauser supplies process control sensors/instruments to a wide variety of industries worldwide and is known for highly reliable, accurate, and innovative measurement devices. The Cerabar series of pressure transmitters offers both ceramic and stainless-steel measuring cells for…
LVDT signal conditioner configures in just minutes
NewTek’s smart NTC-6000 Signal Conditioner takes out the complexity of setting up a signal processing system while protecting against operating failures and cybersecurity hacks. Both intuitive and user-friendly, the NTC-6000 Quik-Cal supports AC-operated LVDT, RVDT, or LVRT half-bridge sensors in converting unconditioned position feedback into a choice of voltage, current and digital outputs including 4-20mA, 0-5V, […]
How will sensors be used to increase warehouse automation?
Many of today’s warehouses have been or are in the process of transitioning from strictly a manual or conventional warehouse to a partially and eventually a fully automated warehouse. Depending on the level of sophistication, any automated process requires a variety of sensing technologies. Research from one company predicts that over 75% of companies will […]
Powerful compact, low-cost electromagnets
A powerful series of compact, low-cost electromagnets has been released by Magnetic Sensor Systems (MSS). Their E-22-150 Series of Tubular Electromagnets 1.5 in. in diameter x 2.15 in. feature 19 different windings to select from based on the duty cycle and holding force requirements of the application. E-22-150 Electromagnets are immediately available off-the-shelf in sample […]
Miniaturized MEMS pressure sensor incorporates proprietary tech for enhanced EV thermal management
Melexis has introduced the MLX90830, a miniaturized MEMS pressure sensor that incorporates the company’s patented TriphibianTM technology. The sensor is capable of measuring gas and liquid media from 2 to 70 bar. It is factory-calibrated to measure absolute pressure and provides a proportional analog output signal. The MLX90830 is designed to be integrated into the […]
Next generation CMOS image sensors for low light conditions
Teledyne e2v announces OnyxMax, the next generation of its popular Onyx 1.3M low light CMOS image sensor. This new sensor has been designed for extremely low light conditions, down to 1 mLux. The combination of sensitivity and image resolution increases its range, allowing even small objects to be detected in harsh conditions. This makes OnyxMax […]
How do micro photo sensors work and what are they used for?
Micro photo sensors have built-in amplifiers and are available in a variety of configurations, with modulated, non-modulated, and polarized light beams. They’re used to provide precise and stable sensing or positioning of materials, components, or assemblies. Some have integrated connectivity, like IO-Link and IP 67 environmental ratings. Uses for micro photo sensors include precision manufacturing […]
What is normal blood pressure?
If you answered 120 over 80 mmHg, you are using criteria that is over 20 years old. As reported in a 2003 article, revised guidelines categorized normal blood pressure as <120/80 mmHg. Since the measurements are meant to lower the risks from not recognizing what is often called the silent killer – high blood pressure […]
What are the key specifications of machine vision sensors?
Charged coupled devices (CCDs) and CMOS active pixel sensors (CMOS sensors) are the primary image sensor technologies. They rely on lenses and other optical components to deliver the image to be captured. This FAQ reviews the differences between CCDs and CMOS sensors, looks at some key specifications of image sensors and the concept of quantum […]
AI for smart waste management?
Smart waste management is one of the core tasks within smart cities, i.e. those urban areas in which innovative technologies and data-driven solutions are used. They aim to improve the quality of life of residents, minimize environmental impact, and use resources more efficiently. Conserving resources is not just about recycling, but also about innovative approaches […]
3MP SoC image sensor for LED flicker-free, high dynamic range automotive cameras
OMNIVISION debuted the first OX03J10 3-megapixel (MP) CMOS system-on-chip (SoC) image sensor with 140dB high dynamic range (HDR) and LED flicker mitigation (LFM) for superior image quality regardless of lighting condition. The OX03J10 SoC is ideal for surround-view systems (SVS), rear-view cameras (RVC), and camera-monitoring systems (CMS). By integrating the image sensor with a dedicated image signal processor (ISP) […]
Ready-to-use wearable reference design includes up to eight wirelessly connected sensor nodes
Unlimited access to a personal feedback coach? That’s the dream of many fitness and gaming enthusiasts. With the brand new Smart Connected Sensors platform, Bosch Sensortec ensures that movements and repetitions are not only measured but that users get qualitative feedback on the movement execution. Specifically designed for full-body motion tracking, this new platform provides […]
mmWave radar sensor chip and diagnostics-integrated driver chips address functional safety
Texas Instruments has introduced new semiconductors designed to improve automotive safety and intelligence. The AWR2544 77GHz millimeter-wave radar sensor chip is the industry’s first for satellite radar architectures, enabling higher levels of autonomy by improving sensor fusion and decision-making in ADAS. TI’s new software-programmable driver chips, the DRV3946-Q1 integrated contactor driver and DRV3901-Q1 integrated squib […]
How many ways are there to measure temperature?
Temperature is the most commonly measured physical quantity. Thermometry, the measurement of temperature, involves a wide range of technologies. Its uses range from maintaining a comfortable and safe environment for people to industrial processes operating at over 3,000 °C and quantum computing operating at near absolute zero. This FAQ reviews some of the more common […]
Jointly developed reference design address depth-aware, in-cabin sensing data design challenges
Eyeris Technologies, Inc. announced their partnership on a production reference design to improve safety and comfort in the entire automobile cabin. This jointly developed reference design integrates Eyeris’ advanced monocular three-dimensional (3D) sensing AI software algorithm into Leopard Imaging’s 5-megapixel (MP) backside illuminated (BSI) global shutter (GS) camera, which uses OMNIVISION’s OX05B image sensor and […]
How will NHTSA’s AEB mandate impact sensing?
In 2019, the U.S. Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) published a draft pedestrian automatic emergency braking (PAEB) test procedure. When, the results of testing conducted in 2022 on 12 light vehicles were published in 2023 (2022 Light Vehicle Pedestrian Automatic Emergency Braking Test Summary, March 2023), one conclusion was: No vehicles […]
LVDTs provide critical measurements for steam turbines
Hermetically-sealed linear position sensors from NewTek Sensor Solutions tolerate the high temperatures and vibrations of steam turbines to deliver accurate and reliable position feedback on the position of the governor and throttle valves. Their high measurement accuracy also makes them ideal for monitoring turbine shell expansion and bearing vibrations as part of process control systems. […]
Intro to panel mount encoders
In the domain of electrical engineering, panel mount encoders play a pivotal role in precision measurement and control systems, influencing the performance and accuracy of a diverse range of applications. Panel mount encoders fall under the category of rotary encoders. These devices are physically affixed to panels and find primary utility in human interface applications. […]
AchieVe Series inductive proximity sensors from AutomationDirect
AutomationDirect has added the new AchieVe series of inductive proximity sensors which offers great value for general industrial applications. These tubular inductive proximity sensors made from stainless steel are offered in 8mm, 12mm, and 18mm barrel sizes. Flush and non-flush mount styles offer a range of sensing distances up to 8mm. Both PNP and NPN…
How sensors help you play ball: part 3
Sensing in the 2022 FIFA World Cup soccer ball consists of a 6-axis motion sensor, a 3-axis magnetometer, a pressure sensor (in one version), and ultra-wideband (UWB) technology. The 0 to 2 bar (0 to 29 pounds per square inch (psi)) pressure sensor with 0.025 (0.36 psi) resolution can confirm that the ball is within […]
8×8, multi-zone ToF ranging sensor operates a 1.6 mW in low-power mode
STMicroelectronics’ VL53L8CX, the latest-generation 8×8 multizone time-of-flight (ToF) ranging sensor, delivers a range of improvements including greater ambient-light immunity, lower power consumption, and enhanced optics. ST’s direct-ToF sensors combine a 940nm vertical cavity surface emitting laser (VCSEL), a multizone SPAD (single-photon avalanche diode) detector array, and an optical system comprising filters and diffractive optical elements (DOE) […]
TMR sensors improve sensitivity and power efficiency
Littelfuse, Inc. announced the release of its highly anticipated 54100 and 54140 miniature Tunnel Magneto-Resistance (TMR) effect sensors. These sensors offer unmatched sensitivity and power efficiency, revolutionizing the magnetic sensing industry. The key differentiator of the 54100/54140 sensors is their remarkable sensitivity and 100x improvement in power efficiency compared to Hall Effect sensors. These sensors offer […]
A comprehensive exploration of IEC 60601-1-8 for medical alarm systems
In the intricate web of healthcare technology, the seamless integration of medical alarm systems plays a pivotal role in ensuring patient safety and the efficient functioning of medical equipment. Due to the mission-critical nature of these medical alarms, it should come as no surprise that additional regulations govern them, specifically IEC 60601-1-8—a standard that delineates […]
ProSense fixed range, head-mounted temperature transmitters
AutomationDirect has added more ProSense XTH2 series fixed range, head-mounted temperature transmitters to their lineup of temperature transmitters/signal conditioners. The XTH2 series fixed-range transmitters are for Type Pt100 3-wire RTDs and are ready to use out-of-the-box with pre-configured measuring ranges up to 500°F (260°C). These new convenient head-mounted temperature transmitters are ideal for a variety…
How do sensors help you play ball? Pt. 2
A FIFA-compliant match ball from adidas has a TDK InvenSense 6-axis MotionTracking device and other electronics mounted in the center of the ball. As shown in Figure 1, the adidas patented suspension system stabilizes the electronics module. Instead of having the sensing/communication module mounted on the surface of the ball near the inflator valve, the […]