Extruded body, ISO-6431 compliant, air cylinders have standard magnetic pistons in all 7 bore sizes 32 to125mm. Strokes to 1000mm. Adjustable air cushions at both ends and machined male rod thread with jam nut are also standard. Hard anodized aluminum …
Fabco-Air’s ISO-6432 Air Cylinders
A wide range of models and options are offered for the most demanding applications. Stainless steel barrel and anodized aluminum end covers insure long life and corrosion resistance. Available in 12~25mm bores with strokes 10~500mm. Standard features i…
Automotive 75, 125, and 250 Series solenoid valves from Numatics
Numatics Inc offers the high speed, heavy duty Automotive 75, 125, and 250 Series valves which are specially designed for general use on all types of automation. The Automotive 75, 125, and 250 Series valves are all 5 ported valves with 2 and 3 positio…
Chipsol MS 2/2 Valve: Small but large pressure range
Norgren’s Swiss-based subsidiary FAS has launched the Chipsol Media Separated Valve (Chipsol MS 2/2 Valve), with a host of key benefits including low power consumption, compact size and an unsurpassed operating pressure range. The new Chipsol Media Separated Valve was created in response to the higher demand for small media separated valves in environmental monitoring […]
Piab’s piSAVE optimize cuts energy cost by 30-50%
Piab has unveiled a vacuum controlled proportional pressure regulator that can enhance the performance of an ejector pump while saving 30 percent to 50 percent in energy cost — the piSAVE optimize. The piSAVE optimize is a fully pneumatic device that is easy to install and utilize, making it the perfect pressure regulator for air-driven […]
High-speed cylinder customized for beverage application
For more than six decades, Nason has provided pneumatic and hydraulic pressure devices to a variety of industries. More than a decade ago, Nason took the knowledge gained from designing and manufacturing custom devices for quality, long life products and applied it to pneumatic and hydraulic automation products. Nason’s expertise and customization capabilities are what drew a North American provider […]
Fabco-Air’s Pneumatic & Hydraulic Swing Clamp Cylinders
Rugged, double acting clamping products from Fabco-Air have single or double-sided clamp arms with choice of CW or CCW rotation. Clamp arm extends straight up as it releases work piece, then rotates 90° away providing easy access for loading and unloading. When clamping, the arm rotates 90° back, then retracts straight down to the clamp […]
Fabco-Air’s Guided Motion Air Cylinders
Ideal family features compact design and extended load carrying capabilities. Twin guide shafts provide precision, non-rotating positioning. Choose sleeve or ball bearings. Four mounting methods provide flexibility. Dowel pin holes on mounting surfaces provide accuracy. Lubrication not required. Magnetic pistons are standard. Optional sensors adjust easily in linear slots in the housing. Interchangeable with popular […]
Fabco-Air’s NFPA Cylinders offer high cycle life, excellent wear resistance
NFPA Cylinders from Fabco-Air features non-metallic, oversized composite rod bearings for maximum load support, high cycle life and outstanding wear resistance. Apart from being self-lubricating, the optional composite barrels are also made from impact resistant and high-strength materials. They have low coefficient of friction and bore sizes range from 1.5-inch to six inches, with maximum […]
Rexroth’s Series CD04 Directional Control Valves offer high flow
Bosch Rexroth Corporation offers the Series CD04 Directional Control Valves, which are inline pneumatic directional control valves with 1/8-inch PTF ports offering high flow despite their compact size. The Series CD04 comprise various versions ensuring application flexibility. Available models include pneumatically actuated control valves, electrically actuated ones and mechanically/manually actuated variants. Compared to other inline […]
110 Gallon Chip Vac Available For Big Jobs
EXAIR’s new 110 Gallon Chip Vac™ System offers a fast, easy way to clean chips or other dry materials from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equipment. It can easily be moved from drum to drum to keep different materials separate for recycling. Dusty materials, such as […]
Clippard’s Maximatic FRLs enhance pneumatic systems
Clippard Instruments Laboratory Inc. Maximatic Filters, Regulators and Lubricators (Maximatic FRLs) prepare and condition compressed air for utilization in fluid power systems. Pneumatic applications with properly conditioned air have greater efficiency, longer life and lower cost. These Maximatic Filters, Regulators and Lubricators are available in five sizes ranging from #10-32 to 1-inch NPT. Aside from […]
2012 Energy Efficient Hydraulics and Pneumatics Conference
Registration is now open for the 2012 Energy Efficient Hydraulics and Pneumatics Conference (EEHPC) scheduled for November 27-29, 2012 at the Chicago Marriott O’Hare in Rosemont, Illinois. Hosted by the International Fluid Power Society (IFPS), the FPDA Motion and Control Network (FPDA), and the National Fluid Power Association (NFPA), this two-day educational conference will focus on: Workshops designed to […]
SMC Pneumatics upgrades CQ2 pneumatic actuator
SMC Pneumatics has upgraded the CQ2 pneumatic actuator, and it is now available in 15 bore sizes ranging from 12mm to 200mm. It is also five percent to 13 percent less heavy than the old design without any reduction in body strength. Aside from that, the new design utilizes less aluminum, making the new CQ2 […]
EXAIR’s E-Vac ® Vacuum Generators — an affordable way to generate vacuum
EXAIR has developed the E-Vac® Vacuum Generators. These compressed air powered single stage vacuum generators are a cost effective way to create a vacuum for various applications such as surface mounting, aligning, chucking, lifting and clamping. These Vacuum Generators, which are commonly used for pick and place operations, deliver instantaneous response. In addition, these single […]
Fabco-Air’s Parallel Jaw Motion Grippers
24 pages of design information details two families of pneumatic grippers. Synchronous parallel jaw motion models require no adjustment and are available with strokes from 1/4″ to 24″ and grip forces to 400 pounds at 100 psi.
Fabco-Air, In…
Piab suction cups designed for high temperature applications
Piab has unveiled a new material for the piGRIP® suction cup series, as well as its other Universal models and smaller Bellows. The material called Hydrogenated nitrile butadiene rubber (HNBR) is known for its excellent mechanical properties, meaning it has superior durability and is very resistant against tear and abrasions. This new material ensures that […]
Fabco-Air’s Pneumatic Stopper Cylinders
Stopper Cylinders are offered in 32, 40 and 50 mm bores with features and actions to meet differing application requirements. Seven rod end styles are available with strokes of 20 and 30mm. Shock absorbers are standard on lever/roller style models. Direction of rollers is adjustable. Magnetic pistons are standard on all models so magnetic sensors […]
Festo Corporation Celebrates 40 Years of Advancing Automation in the United States
Festo Corporation is celebrating 40 years of advancing automation. Based in Hauppauge, New York, the company has grown to become a significant force in the process and industrial automation industries. Festo Corporation was formed in 1972 to provide parts and service to Festo’s woodworking equipment and to market the line of pneumatic automation components. Over […]
Wilkerson’s Soft Start/Dump Valves ensures safe introduction of pressure
Wilkerson has developed the E09 Series Combined Soft Start Dump Valve and Remote Operated Dump Valve. These Soft Start/Dump Valves ensure the safe introduction of pressure into systems or machines. When installed, the valves allow pressure to slowly build up and set point before they fully open to deliver full flow at line pressure. The […]
EXAIR Threaded Line Vac™ comes with free Super Air Nozzle
The Threaded Line Vac™ manufactured by EXAIR is part of the company’s recent promo valid until 31 October. With a purchase of one unit for US$99, the buyers will get a free two-inch Super Air Nozzle valued at US$57. EXAIR’s Threaded Line Vac is an air operated conveyor that provides end-users with a fast and […]
Siphon Fed Spray Nozzles for Non-Pressurized Applications
EXAIR’s siphon fed spray nozzles atomize fluids in a range of spray patterns for a wide variety of uses. Siphon fed atomizing nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91cm). They combine liquid and compressed air to […]
Festo reveals VTUG multipin pneumatic valve terminal
Festo has developed the VTUG multipin pneumatic valve terminal — an universal valve apparatus with several electrical connection options, providing machine manufacturers and end users greater versatility for easy installation and control. The VTUG multipin pneumatic valve terminal is designed for various industries such as light assembly, semiconductor, electronics, packing, food and beverage. Aside from […]
Manufacturer insight: NewAge Industries
In 1954, Raymond Baker, a young salesman-turned-entrepreneur purchased a small company that manufactured and imported metal hardness testing equipment. The following year, while on a business trip in England, Baker found a revolutionary new product that he felt was just what was needed back in the U.S.—a clear, nylon braid reinforced, flexible PVC hose. It […]
Parker’s P1V-S Series stainless steel air motors for lubrication-free applications
Parker Hannifin Corporation’s P1V-S Series features external components all made of stainless steel. The P1V-S Series is a range of air motors of varied sizes, with powers ranging from 20 watts to 1,200 watts and 5 rpm to 24,000-rpm speed. The air motor is surrounded by polished stainless steel housing, sealed with a flour rubber […]