Bimba Manufacturing Co. announced the completion of its acquisition of Pneumadyne Inc. Headquartered in Plymouth, MN, Pneumadyne has been a manufacturer of pneumatic components and control systems
Beswick’s quick-disconnect couplings: For those “not-normal” applications
Mike Donati of Beswick Engineering is quick and to the point: “I’ll bet that you, or one of your colleagues, have a requirement for a quick disconnect coupling. Normally that isn’t too difficult to source but—and this is why you drink several cups of coffee and stay late at work—you do not have a ‘normal’ […]
Precision pneumatic-to-current P/I transducers
ControlAir Inc. has announced its P200 and P290 pneumatic-to-current P/I transducers. These transmitters are designed to convert standard 3-15, 3-27 or 6-30 psig air pressures into a two wire 4-20 or 10-50 mA signal with a total accuracy up to +/- 0.10%.
Humphrey introduces 153 Series Balanced Solenoid Valve
Humphrey Products’ (www.humphrey-products.com) 153 Series solenoid valve offers a balanced design that features an optimized solenoid and return spring force. Delivering greater flow capacity in a compact package, the multi-purpose valve can be used as normally open or normally closed valve. Whether the media is vacuum or with a full pressure range from zero to […]
SKF CASM Series Servo Actuators
New SKF CASM Series servo actuators introduce ideal electromechanical solutions for applications historically performed by conventional pneumatic cylinders. Their technology in comparison inherently reduces energy consumption, potential contamination, noise, and maintenance, while eliminating the need for constantly running compressors, hoses, and other components associated with pneumatic cylinders. Applications include factory automation, packaging machinery, food and […]
SMC’s solenoid valves with robust design
SMC’s (www.smcusa.com) solenoid valves — the SJ, SV, VQC and the SY series — feature a robust design that seamlessly combine high flow with low power consumption. Available in two compact sizes, the SJ series was specifically designed to deliver a low maintenance, low profile, four port solenoid valve and manifold. The series features a […]
Beswick Compact Subminiature Pressure Regulator offers Excellent Pressure Regulation
Despite its extremely compact package, Beswick’s (www.beswick.com) Subminiature Pressure Regulator delivers excellent pressure regulation. Allowing relatively precise pressure regulation, the Subminiature Pressure Regulator offers an outside dimension that is similar to that of Beswick’s 10-32 threaded needle valves. For leak tight connections, the inlet port features a 10-32 external thread and an O-ring face seal. […]
ACE Controls and Enertrols signs new distributor
ACE Controls has announced the appointment of Exotic Automation & Supply as a pneumatics distributor for ACE and Enertrols products in SE Michigan.
Special design award goes to pneumatic hand
East Providence, R.I.—Louisiana Robotic Machines has developed an innovative, all-pneumatic robot hand that uses Zipper-style cable carriers in its finger joints. The design won the “Special Design” award in the igus vector 2012 competition, which sought to honor those implementing polymer cable carriers in unique and challenging ways. Louisiana Robotic Machines designs, develops, and builds […]
Fluid power: A great career choice
Loved seeing a news item last week on the Facebook page of the Minnesota West Community & Technical College. Their Granite Falls Campus announced that its Fluid Power Technology program, a 2-year technical program, has had 100% job placement rate for the class of 2012.
Piab’s piINLINE optimize productivity while reducing energy costs
Piab (www.piab.com) has unveiled the piINLINE, a series of inline vacuum ejectors with high vacuum flow and based on COAX technology, making them suitable for the packaging industries. “The new range has a high vacuum flow and tolerates fibers and dust, so they work very well in applications for carton board and solid board materials […]
Festo pneumatic safety valves designed with safe exhaust function
The certified and tested pneumatic safety valves from Festo (www.festo.com) not only stand alone or are easily fitted in an air preparation module — they can also be integrated into existing as well as new circuits. Following the growing demand for safety products in the field of pneumatics, the company has provided the perfect solution […]
High Performing Atto Super Air Nozzle from EXAIR
EXAIR (www.exair.com) has specifically developed Model 1108SS Atto Super Air Nozzle to deliver the highest performance attainable from a tiny nozzle. Engineered to minimize compressed air consumption while maximizing entertainment of room air, the Atto Super Air Nozzle provides the smallest, most precise blowoff together with a highly focused and forceful blast of airflow. Packing the […]
Wilkerson unveils WRA102 Standard High Precision Regulator
Wilkerson (www.wilkersoncorp.com), a manufacturer of compressed air treatment components and control products, has introduced the WRA102 Series of Standard High Precision Regulator. Featuring a maximum supply pressure of 500 psig (35.0 bar), the regulator comes with an aluminum body and housing while offering a control sensitivity of .251 inches (.32 cm) water column, making it […]
Clippard 10 mm miniature valves deliver up to 110 psig
Miniature pneumatics valve manufacturer Clippard Instruments Laboratory Inc. (www.clippard.com) has equipped its 10 mm miniature valves, which offer a working pressure of up to 110 psig/7.6 bar and a temperature rating of up to 122°F, with the same brand of quality and reliability offered in its other products. The two-way and three-way valves are available […]
Bimba Ultran Rodless Cylinders support high loads
The high coupling strength of Bimba’s (www.bimba.com) Ultran rodless cylinder allows it to support higher loads without the piston uncoupling from the carriage. This is attributed to the magnets on the piston and the carriage which creates a strong bond that seamlessly holds them together. Once the cylinder is actuated, the carriage and piston move […]
Festo’s DHxS pneumatic grippers set new industry standard
Festo’s (www.festo.com) three-point, parallel, angle and pneumatic grippers, DHxS, set new standard in performance as they offer optimized overload protection and gripping force retention. Designed with integrated sensor slots, the compact grippers offer various forward-looking features to ensure precision and reliability. The integrated fixed restrictor serves as a safety buffer, preventing damage caused by excessive […]
Pressure and vacuum options from Thomas’ line of pumps and compressors
Thomas’ line of twin piston pumps and compressors are designed to withstand demanding applications. Comprised of the 2660/2668 Series, these pumps and compressors have air flows to 5.3 cfm (148.7 l/min), pressures to 160 psi (11 bar) and maximum vacuum to 99% of local barometer (990 mbar). The platform design gives OEMs the ability to […]
Pneumatics – Choose the Best Valve for Optimum Performance
Every application has unique requirements and functionality. Choosing the best pneumatic valve for the best performance requires knowing how to select based on specifications. The specifications are based on many factors from the type of valve design to the flow of the flow of the valve. This webinar will cover the basic valve designs and […]
PHD Series GRM1 Miniature Clamp delivers 225 lb of clamp force
PHD (www.phdinc.com) offers a light-weight, compact clamp that boasts a total clamp force of up to 225 lb — the Series GRM1 Miniature Clamp. Weighing less than 1 pound, this cost-competitive clamp features a proven cam-design technology that locks the jaws in the closed position to ensure part retention in case air pressure is lost […]
Clippard Pneumatic Brass Silencing Mufflers
Clippard Instrument Laboratory, Inc. added a line of miniature pneumatic mufflers. These silencing mufflers utilize porous sintered bronze air mesh to reduce air exhaust noises from valves, cylinders and other pneumatic products for quiet system operation. Mufflers help to meet OSHA requirements by maintaining safe workplace sound levels below 90 dBA with minimum flow restriction. […]
Beswick Dry Break Quick Disconnect sets a new standard for miniaturization
Beswick Engineering (www.beswick.com) has introduced its latest dry break quick disconnect, which sets a new industry standard for high performance and miniaturization. Specifically manufactured and designed for applications requiring leak-tightness, space, light weight and durability, the new dry break quick disconnect is suitable for medical and dental equipment, laboratory equipment, instruments, aerospace equipment, semiconductor and […]
Piab VGS 3040 vacuum gripper system enhance productivity
Industrial vacuum technology leader Piab (www.piab.com) has introduced a vacuum gripper system that allows users to reduce operating costs while optimizing productivity. Specifically designed with flexible material handling solutions, the VGS 3040 vacuum gripper system improves reliability, reduces energy consumption and delivers faster response times. It is ideally suited for applications across the production line […]
Watts FluidAir dial regulators feature a balanced valve design
Watts FluidAir (www.wattsfluidair.com) complements its vast array of air preparation products with the release of its latest Dial Regulators, which feature a balanced poppet/valve design, a maximum inlet operating pressure of 300 psig and a maximum temperature rating of 150°F. A part of the 14 Series FRL Line, the Dial Regulators are available in four […]
Hydac bladder accumulator ideal for emergency operation applications
Hydac Technology (www.hydacusa.com) has unveiled its bladder accumulators which consist of either forged or welded pressure vessel, the armatures for the fluid-side or gas-side connection and accumulator bladders. These hydropneumatic accumulators feature a flexible bladder, which serves as the separation element between the operating fluid and the compressible gas cushion. When the pressure increases, the […]