LEADERSHIP IN ENGINEERING
| |
 |
|
Category: Fastening & Joining
Go Back
|
|
| |
| |
|
|
Fluid Level Sight Glass es are Explosion Protective
GN 743.6 Metric Sized ATEX Explosive Protective Fluid Level Sight
Glasses are RoHS-compliant, and are suitable for use in explosion
risk environments. The sight glasses have a body of turned
aluminum, bright finish, an ESG scratch-proof glass sight glass,
a stainless steel retaining ring, and a seal of FPM rubber (Viton®).
These sight glasses are sealed with an O-ring on the periphery and
not on the face edge of the glass. Leak tightness is therefore not affected
by axial pressures. The seal is housed in a groove and therefore cannot be
lost. Meanwhile, this groove prevents the seal from being extruded when the
sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, guaranteeing
better and easier sealing. Cold/heat resistance range is -20°C (-4°F) to 150°C (300°F).
Hinges in Stainless Steel Stand Up to Rough Conditions
GN 237-NI Stainless Steel Hinges with Countersunk Thru Holes from
J.W. Winco, Inc. are RoHS compliant and tolerate harsh conditions.
Both the hinge body and pin are constructed of stainless steel.
A zinc die-cast version with black powder coated textured finish is
also available. For certain minimum quantities, an aluminum
version of the hinges is offered upon request. Various
metric and inch size fasteners and kit packages are
available upon request.
Stainless Steel Door Locking Mechanisms Off er Economy, Quality
GN 115-NI Metric Size Stainless Steel Door Locking Mechanisms are RoHS complaint, economically
priced, and offer a straightforward locking action rather than a locking and clamping action.
The mechanism is mounted through a hole from the front and fixed with a hex nut in the back.
By turning the lock, limited to a maximum of 90 degrees, the latch is moved behind the frame,
preventing opening of the door.
All components are made of stainless steel. The mechanisms are available with
star knobs, or triangular, square or double bit key configured spindles. A choice
of nine differently shaped catch plates provides a range of latching distances
from 6 to 28 mm (.236 to 1.10 inches). Locks are supplied unassembled, and
keys are ordered separately. |
| |
For more information, visit
www.jwwinco.com
call 800-877-8351
fax 800-472-0670
or email sales@jwwinco.com.
Copy the code in the box below to your website to have your visitors vote for your company.
|
|
|