A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont. This new SDLM-0038-070-01-01M Linear DC Actuator features high repeatability, 1.25-micron resolution, a continuous force of 14.5 N […]
TMR magnetic sensors optimized for current, position sensing
MultiDimension Technology Co., Ltd. (MDT) has released the TMR2623 linear magnetic field sensor with built-in programmable signal conditioning circuitry. Designed for current sensing, position sensing, and other high-performance industrial magnetic sensor applications, they are factory-calibrated and temperature-compensated to customizable sensitivity and full-scale voltage output levels supporting a wide measurement range up to ±500 Gauss, achieving high […]
Magnetic sensors optimized for ADAS applications
Allegro MicroSystems, Inc. announced the launch of its A33110 and A33115 magnetic position sensors at the Sensors Converge Conference in San Jose, CA. Designed for advanced driver assistance systems (ADAS) applications that require high levels of accuracy and heterogeneous signal redundancy, Allegro’s newest sensors combine the company’s vertical Hall technology (VHT) with cutting-edge tunneling magnetoresistance (TMR) technology in […]
Temperature, humidity sensors/signal conditioners target IoT apps
Renesas Electronics Corporation is changing the way designers build sensor-connected IoT applications with a range of new solutions targeted at faster design cycles, improved accuracy, and reduced system cost. In addition to the new HS4XXX family of relative humidity and temperature sensors, Renesas is introducing the ZSSC3281 sensor signal conditioning (SSC) IC for highly accurate amplification, digitization, and sensor-specific […]
Ultra-low-noise barometric pressure sensors target smart home appliance apps
TDK Corporation announces that the InvenSense ICP-20100, the latest generation of the SmartPressure MEMS Barometric Pressure Sensors, is now in mass production and has been certified by NextNav. Launched in 2021, the NextNav Certified process independently verifies the InvenSense sensor accuracy measurements, by engaging directly with component manufacturers to rigorously test sensors in real-world operating […]
Incremental encoders offer 16 quadrature resolutions from 96 to 4096 PPR
CUI Devices’ Motion Group announced the introduction of a new series to its AMT incremental encoder family. Based on the existing AMT11 series package, the new AMT11A series is not subject to silicon-related lead time constraints and can serve as a drop-in replacement for AMT11 encoder models. AMT11A encoders offer 16 quadrature resolutions from 96 to 4096 PPR, selectable via […]
Vacuum-tight connectors handle harsh environments
Extending the capabilities of its field-proven M series, LEMO is introducing the new cutting-edge M series HY, a new model specifically designed for all applications requiring vacuum-tight connections in harsh environments. Its ultra-low leak rate, coupled with a wide operating temperature range, allows for unmatched performance in optical enclosures or high-altitude applications. This new addition […]
Touchless angle sensorssport IO-Link output interface
Novotechnik U.S. introduces the RFC4800 Series of touchless angle sensors measuring angular position up to 360°, revolution counter, and speed—without wear. The RFC 4800 is now available with an IO-Link output interface. Its serial communication protocol needs only three wires to transmit measured values and status information simultaneously. The status bit can signal a controller […]
Human-like skin sensor detects objects for robotics apps
BeBop Sensors, Inc. announced the BeBop Sensors RoboSkin line of skin-like coverings for tactile awareness for humanoid robots and prosthetics. A true nervous system for robots at less than 1mm thick, RoboSkin is the only technology that fits all robotic body parts: limbs, fingers, feet, head, and torso, to make robots “feel” better. RoboSkin’s advanced fabric-based sensor skin […]
Tool-less rectangular connectors boast 10,000 mating cycles
There are industrial applications that require frequent mating cycles throughout life such as measuring/controlling drawer-mounted equipment, molding control equipment, and replaceable tools. Since the connectors of these applications need to be connected and disconnected several times a day, failing to install high-performance connectors with a sufficient mating cycle rating could result in unstable connections with […]
Advanced global-shutter image sensor for affordable, reliable driver-monitoring safety systems
STMicroelectronics is enhancing vehicle safety with its latest global-shutter image sensors for driver monitoring systems (DMSs). DMSs continually watch the driver’s head movements to recognize signs of drowsiness and distraction, enabling systems in the vehicle to generate warnings that can preserve the safety of occupants. Traffic agencies estimate that about 95% of road traffic accidents […]
Solid-state laser arrays target sensing apps
Lumentum Holdings Inc. announced the M Series multi-junction VCSEL arrays for next-generation automotive, industrial LiDAR, and 3D sensing applications and the availability of the first M Series product, the M51-100 905 nm 70 W multi-junction VCSEL array. Lumentum’s automotive qualified, high-performance M Series features peak powers suited for short- and long-range advanced mobility and industrial LiDAR applications. […]
Hall switches feature ASIL B safety ratings
TDK Corporation has upgraded its Micronas Hall-effect switch family, HAL 15xy, for automotive and industrial applications – All now defined as SEooC (Safety Element out of Context) ASIL B-ready, according to ISO 26262. Modules equipped with HAL 15xy can more easily fulfill higher safety criteria in automotive applications such as brake fluid level sensing, seat […]
Barometric pressure sensor targets mobile device apps
Bosch Sensortec introduces the BMP581, a barometric pressure sensor that couples low power consumption with extreme accuracy to provide altitude tracking in wearables, hearables, or IoT devices. This capability makes it ideal for applications such as fitness tracking, fall detection, indoor localization, and navigation, enabling new use cases that were previously impossible. This extreme level […]
Right-angle BNC designed for pick-and-place assembly
Samtec now offers a 75 Ohm High-Density BNC solution (HDBNC Series) with an exclusive, balanced right-angle design ideal for high volume pick-and-place manufacturing (-BM1D & -BM2D die-cast options). Designed primarily for use in advanced broadcast video equipment, Samtec HDBNC Series was tested to the latest SMPTE 2082 12G-SDI pass/fail specifications, with return loss measurements surpassing […]
GMR crankshaft and camshaft sensors optimized for HEV engine platforms
Allegro MicroSystems, Inc. announced the release of two new state-of-the-art giant magnetoresistances (GMR) crankshaft and camshaft sensors. The ATS16951 (crankshaft) and ATS16351 (camshaft) sensors are unique in the market and provide manufacturers with a single-vendor solution that’s ideal for hybrid vehicle engines, with use cases extending to two-wheelers, off-road vehicles, and application designs requiring extended air gap performance. […]
Advanced MEMS sensors from STMicroelectronics power-up the onlife era
STMicroelectronics is introducing its third generation of MEMS sensors. The new sensors enable the next leap in performance and features for consumer mobiles and smart industries, healthcare, and retail. MEMS technology is the cornerstone of the robust and chip-sized motion and environmental sensors that drive the intuitive context-aware features of today’s smartphones and wearables. ST’s latest […]
ToF sensor maps 3D surfaces
STMicroelectronics has announced a new family of high-resolution Time-of-Flight sensors that bring advanced 3D depth imaging to smartphones and other devices. The 3D family debuts with the VD55H1. This sensor maps three-dimensional surfaces by measuring the distance to over half a million points. Objects can be detected up to five meters from the sensor, and even further […]
Stainless-steel pressure sensors handle 0 kPa to 100 MPa range
CUI Devices’ Sensors Group announced the addition of pressure sensors to its product portfolio. Offering absolute, gauge, and sealed gauge pressure types, these pressure sensors based on piezo technology feature analog or digital I2C outputs and pressure ranges from 0 kPa up to 100 MPa. All PS series models are temperature compensated and housed in stainless steel construction […]
Sensor processing unit integrates DSP to run AI algorithms and MEMs sensors on same silicon
STMicroelectronics announced the launch of the Intelligent Sensor Processing Unit (ISPU) that combines a Digital Signal Processor (DSP) suited to run AI algorithms and MEMS sensor on the same silicon. In addition to reducing size over system-in-package devices and cutting power by up to 80%, merging sensor and AI puts electronic decision-making in the application Edge. Here, it […]
Ultra-low-power IC supports accurate measurement of ECG, temperature, differential capacitance and optical signals
Ensilica has announced the ENS62020, an ultra-low-power healthcare sensor interface IC for monitoring vital signs in wearable healthcare and medical devices. The chip, which will be initially available with evaluation boards, has been created to meet the needs of a diverse array of home-use and single-use medical sensors – from oximeters to smart plasters – […]
high-precision pressure transmitters feature extremely low-profile design
TDK Corporation presents the AVD series of new pressure transmitters, distinguishable by their extremely low-profile design and high precision. The transmitters with B58621V* ordering codes are available in three versions for different pressure measurement ranges including 0 to 16 mbar, 0 to 100 mbar, and 0 to 7 bar. The series offers high precision levels […]
NXP enables secure sensing with next-generation security-certified NFC solutions
NXP’s new single-chip NFC solutions provide security, dual-mode tamper status detection, and battery-free sensing for IoT applications. NXP Semiconductors announced the NTAG 22x DNA family, combining certified security with an innovative tamper status detection mechanism and battery-free sensing to measure a change in ambient conditions, such as moisture, liquid fill level, or pressure. This allows […]
Tactile sensor targets robotic hand applications
Melexis has made a major innovation to improve robots’ ability to interact with fragile or diverse objects. The company has unveiled Tactaxis, a fully integrated tactile sensor that is compact, soft, and provides the 3D force vector acting on its surface. This improves robots’ hands and grippers, making delicate operations such as fruit picking possible. […]
RJ-45 housing keeps extended connection clean and dry
Platinum Tools announces the launch of the new weatherproof RJ45 coupler housing (p/n 744). Additional features of the new weatherproof RJ45 coupler housing include: IP64 rated – sealed against dust and splashing water; Cat 5e/6/6A compatible with appropriate coupler; Full rubber liner and dual locking latches; Center mounting points to secure to a surface; Now […]