rtraiger

CUI Devices’ Interconnect Group announced the addition of modular connectors to its connectors product portfolio. Available in RJ10, RJ11, RJ12, RJ13, and RJ45 types, CUI Devices’ CRJ series of modular connectors offer a variety of position and contact options including 4P4C, 6P2C, 6P4C, 6P6C, 8P8C, and 8P10C. Ideal for networking or telecommunication equipment, these modular connectors offer single port, […]

ON Semiconductor introduced the latest addition to the XGS series of CMOS image sensors. The XGS 16000 is a 16 Megapixel (Mp) sensor that provides high-quality, global shutter imaging for factory automation applications including robotics and inspection systems. Consuming only 1 Watt at 65 frames per second (fps), the XGS 16000 delivers exceptional performance at […]

The LMR-240 Kit from Times Microwave Systems packs everything needed for low-loss, 50-Ω cable assemblies into one box. The kit contains cables, interconnect components, lubricant to facilitate connector assembly, and even cable cutting tools, including the easy-to-use model CCT-03 tool for exposing and prepping cable center conductors with clean, burr-free cuts ideal for low-VSWR connector […]

Bulgin has introduced an intuitive online configurator. By using the Custom Cable Assembly Builder, it is possible to outline the fundamental design of a custom assembly and derive an initial visualization, prior to moving towards the sampling phase. Assembly concepts for power, data, and fiber optic implementations can be rapidly created and any adjustments required […]

A line of connectors for flexible circuits that eliminates soldering and welding when attaching wires to foil and film substrates have been introduced by ETCO Incorporated of Bradenton, Florida. ETCO FWC Series Flex Circuit Connectors attach to lead wires using an “F” style crimp by automatic wire processing equipment and have features that securely embed […]

icotek offers the tried and tested KEL-SNAP frame now as a new splittable version of KEL-SNAP-S. The patented KEL-SNAP-S frames provide a quick and tool-free assembly for the KEL / KEL-U / KEL-QUICK / KEL-FG-A cable entry frames from icotek. Switch cabinets can be equipped with the KEL-SNAP frame in advance by the control manufacturer […]

A Panel Interface Connector (PIC) also known as a programming port is a device that typically mounts to the outside of a control panel housing a PLC, computer, or other typed of programmable device. Once in place, the PIC, which houses convenient pass-through connections, allows quick, easy, safe access to the controls inside the cabinet […]

PolyPhaser has expanded its comprehensive line of fiber solutions to include even more in-stock options available with same-day shipping. PolyPhaser’s newly expanded line of fiber interconnects provides a wide range of connectivity solutions and upgrade options for fiber enclosures and panels. In addition to fiber enclosures, this expanded line of outdoor fiber solutions now includes single-mode […]

Sigma-Netics announces its 703-U and 703-UJ Series of UL-rated, explosion-proof pressure switches. These components are suitable for gaseous or liquid fluid systems in hazardous applications, including offshore exploration, petrochemical processing, and oil and gas pipelines. The 703-U and 703-UJ Series have corrosion-resistant stainless steel construction and UL ratings for hazardous locations, including Class 1: Division […]

Allegro MicroSystems, Inc. has introduced a new, state-of-the-art giant magnetoresistance (GMR) speed sensor that measures the rotation of ferromagnetic gears. The ATS19480 speed sensor IC provides a single-channel solution that’s ideal for hybrid and pure electric vehicle transmissions, with use cases extending to two-wheelers, off-road vehicles, and industrial application designs requiring speed-only information. Combining advanced GMR […]

NewTek Sensor Solutions introduces a new series of Difference/Sum LVDT Signal Conditioners that improve a sensor’s performance during large temperature variations. By measuring the difference of the output over the sum (S1-S2)/(S1+S2), the NTC-6000-DS Quick-Cal LVDT Signal Conditioner compensates for changes in resistance in copper windings due to temperature fluctuations. As a result, the Ratiometric […]

SCHURTER brings optical sensing to conventional switching, with its new TTS Touchless Switch. The TTS is a robust stainless-steel switch, designed for indoor or outdoor public use to prevent the spread of pathogens. The COVID-19 pandemic has greatly raised awareness about the transmission of viruses and bacteria via surfaces, particularly as it relates to man […]

Texas Instruments introduced the first devices in a new family of humidity sensors that provide the industry’s highest reliability and accuracy and the lowest power consumption – along with built-in protection of sensing elements. The HDC3020 and HDC3020-Q1 will allow engineers to create more reliable industrial and automotive systems that withstand potential damage caused by moisture, […]

To provide customers with greater choice and increase design flexibility, Harwin now offers rear panel mount cable connectors for both its 2mm-pitch Datamate and 1.25mm-pitch Gecko high-reliability (Hi-Rel) series. These will complement the company’s existing front panel mount solutions, broadening the scope of how connector housings are attached to an enclosure or panel. The clear […]

Growth in the deployment of advanced driver assistance systems (ADAS) technologies has led to an increase in the number of high resolution and high frame-rate cameras within vehicles. This requires an increased amount of data that must be reliably transmitted from the ADAS system, including the camera itself, to the signal-processing control unit. In response […]

Process plants typically use a multitude of sensors, each of which is normally connected to a transmitter. Older sensor technologies use analog signals to communicate with transmitters, but more modern models employ digital technology to improve accuracy, ease calibration, simplify troubleshooting, and reduce required maintenance. Endress+Hauser Memosens technology converts the measured value to a digital […]

CUI Devices’ Motion Group announced the introduction of a new model to its AMT incremental encoder family. Based on the existing AMT10 series package, the new AMT10E series offers 13 new resolutions not possible in the standard version, including the common 1250 PPR, 2500 PPR, and 5120 PPR resolutions. This extended version of the AMT10 series achieves this by increasing the […]

With the global drive to protect the environment and conserve energy, alternatives to fossil fuel are spearheading the demand for advanced, alternative energy vehicles. After years of development, manufacturers are continually looking for ways to ensure the quality and safety of hybrid and electric vehicles—especially for vibration and shielding performance. To meet this demand, TE […]

Amphenol RF announces the expansion of our 12G MCX product series to include cable assemblies designed on Belden 4855R. This 75-ohm assembly is available in a right-angle plug to right-angle plug configuration in a wide range of standard lengths from six inches to three meters. 12G MCX cable assemblies are suitable for a number of […]

TDK Corporation expands its Micronas 3D HAL sensor portfolio with the Hall-sensor family HAC 39xy*, which features integrated capacitors for stray-field robust position detection in automotive and industrial applications. The TO92UF package was designed explicitly for PCB-less applications, combining both a chip from the HAL 39xy* family featuring stray-field compensation capability and up to two […]

AutomationDirect has added Quabbin 600V control cable to our extensive selection of cable offerings. These cables are ideal for use in control panels, conduits, and where superior electrical properties are required. The smaller diameter design for this cable reduces cost and the space required inside panels and conduits. This cable is available in shielded and […]

Interpower announces a new optional cord clip for all of its U.S.A.-made 3×18 AWG cords and the 3×18 VCT-F Japanese cords. The new Interpower Cord Clip is constructed of a glass-reinforced Polypropylene compounded resin for molding consistency and retention. The clips are set at an optimal 4.75 inches behind the plug, and are molded in […]

The Mencom modular insert series (MIXO) was designed to allow different types of connections housed in a single traditional rectangular enclosure. Since each insert is designed to fit and lock into a frame that ranges in size from 1 module to 12 modules in a single enclosure, the possible combinations are countless. Each enclosure can […]

The 1551 miniature plastic enclosure family from Hammond Manufacturing consists of 49 different sizes; in this latest extension to the range, a further 10 variants have been introduced. In addition to the available size and configuration options, a choice of colors, flanged lids, keyring, and USB C versions are also available. The 1551V ventilated sensor […]

binder USA introduced a new accessory for its 620 and 720 Series miniature and subminiature connectors. New safety clips increase the security of circular connectors in applications where reliability is critical. The clips feature three snap-in lugs that produce an audible click to confirm when the connector is properly latched. For additional protection, these locking […]