Does machining or molding something so small that you can’t see it with the naked eye seem like science fiction to you? Then perhaps you are one of the manufacturing practitioners who need a few myths busted. While they may sound like futuristic concepts, in fact, micromanufacturing and nanomanufacturing are becoming the biggest thing in our industry since the moving assembly line.
A recent survey by the Society of Manufacturing Engineers (SME) found that out of 400 manufacturing professionals who expressed an interest in micromanufacturing, only half are already using it in their products today. And more than 60 percent indicate nanotechnology is important to their organization’s future growth.
Myth #1: Nanomanufacturing and micromanufacturing are technologies that may be something great in the future, but they are not viable for today’s business environment.
Fact: Both nanomanufacturing and micromanufacturing are actively being used by many manufacturers. Nanomanufacturing is a key enabler of the new generation of lithium batteries for electric cars. Micromanufacturing is being used by Boeing, RubberMaid, Gillette and many other companies.
Myth #2: Micromanufacturing is only used in the electronics industry.
Fact: Not any more. Micromanufacturing reaches far beyond electronics. For example, it is essential in the production of many medical devices and critical aerospace systems.
Myth #3: Micro and nano are just reduced sizes of the “life-sized” objects.
Fact: The rules of the game are changed when dealing with these technologies. There are significant process and material behavior changes beyond size that you need to understand.
Myth #4: If I can machine “small” stuff, I can “micro” machine.
Fact: Machining micro pieces requires special tools and skills. In traditional machining, the greater force is exerted by the tool onto the material. For micromanufacturing, it flips, and the material exerts more force on the tool.
Myth #5: If I can mold “small” stuff, I can mold micro particles.
Fact: Molding micro pieces also requires special tools and skills. Often with micro molding, the piece or feature is smaller than the pellet size of the material. This requires special attention to the flow, pressure, fill time and increased impact of the material reaction with the mold wall and, most critically, the design of the mold itself.
Myth #6: Even if I wanted to use micro or nanomanufacturing processes, tools, suppliers and materials are practically non-existent.
Fact: While that once was true, it’s not so much any more. There are growing numbers of processes, tools, materials and suppliers available for manufacturers ready to move into micro and nano manufacturing.
Myth #7: What is happening in this field is all “hush, hush”, so I can’t find experts to teach me.
Fact: There will be plenty of experts sharing knowledge at the MicroManufacturing Conference & Exhibitions and the NanoManufacturing Conference Exhibitions, April 14-15, 2010, at the Hilton Phoenix East in Mesa, Ariz.
These co-located events offer information on cutting edge technology. At the MicroManufacturing Conference manufacturers will discover how to improve part quality and lower production costs, gain a better understanding of the proper techniques, and applications that can be used in daily operations and learn effective solutions to real-world problems.
Attendees at the NanoManufacturing Conference will learn the latest nanotechnology applications and trends in top-down fabrication and bottom-up assembly. They can explore ways to use nanotechnology to make products and obtain information in order to benchmark their operations against other nanomanufacturers worldwide. The leading developers of nano tools and manufacturing systems will also be on hand to discuss their products.
For those who have problems getting beyond the myths, the Society of Manufacturing Engineers will host two free webinars: Understanding NanoManufacturing: An Introduction to a New World on February 9, 2010, 1 p.m. ET hosted by SME’s Nanomanufacturing Tech Group.; and MicroManufacturing: Getting Even Smaller on February 10, 2010, 11 a.m. ET.
Society of Manufacturing Engineers
www.sme.org
::Design World::
Filed Under: Commentaries • insights • Technical thinking
Tell Us What You Think!