Linear Motion Tips

Optimal Engineering Systems, Inc. (OES) has added four high-resolution, low-profile goniometers to their expanding catalog of high precision positioning stages. This newly released, AK120-45 Goniometer Series features precision ground worm gears with a 296:1 ratio and pre-loaded cross roller guides, and +/- 45 degrees of travel with 10 kg of load. The high resolution of […]

A new linear dc motor driven stage from Moticont features one-micron resolution. The high performance VCDS-025-038-02-B1-01 linear voice coil stage features high speed, high acceleration/deceleration, zero backlash, smooth motion, precise positioning, high reliability, and low cost. This non-commutated stage is also clean-room friendly. This compact linear voice coil (also called a moving coil) stage is […]

Thomson Industries, Inc., has announced that its Electrak MD actuator now has a 48-V rating. The availability of a 48-V actuator that can handle loads of up to 2 kN (about 450 lb.) equips battery powered system designers with energy efficiency, cable management and control capability that might otherwise require larger, more expensive actuators. “The […]

Optimal Engineering Systems, Inc. (OES) has debuted its new compact DAG8-60 Series of Motorized Vertical Elevator Stages. These stages feature high parallelism and smooth motion via four high-precision pre-loaded crossed roller bearings. These laboratory grade, high resolution, compact, low-profile elevator stages feature 8 mm of vertical travel. The 60 x 60 mm table with a […]

PI’s new X-417 Integrated Multi-Axis System (IMAS) provides machine builders and system integrators with a freely configurable solution, utilizing highly dynamic, precision XY linear stages as a base, with travel ranges from 4 to 16 in. (102 to 407 mm). The X-417’s modularity allows users to configure the system according to their application needs, including […]

PI introduces a new microscope stage family designed for democratizing the advantages of ultrasonic piezo motor drive systems in super-resolution fluorescence microscopy. The U-781 XY stage provides 128 x 86 mm travel, is equipped with 10-nm resolution linear encoders for direct position measurement at the platform, and is compatible with inverted microscopes of the four […]

OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high-accuracy, high-resolution lift stages. The Z110 Series of Z-axis Stages are available in travel strokes of 15 mm (0.590 in.), 30 mm (1.181 in.), 50 mm (1.969 in.), and 75 mm (2.953 in). These black anodized aluminum alloy stages feature preloaded […]

Robot transfer units have become increasingly important to automated settings. Now, transfer units with collision detection pair with collaborative robots for human-centric technology enabling previously unimagined levels of productivity. Kyle Thompson • product innovation manager | Thomson Industries Chris Diak • southeast automation manager | Motion Most robot arms have six axes of motion, fewer […]

Novotechnik U.S. has introduced the LS1 series of advanced inductive linear position sensors, with stroke lengths of these non-contact sensors from 25 to 200 mm. Absolute linearity of the LS1 Series is to ≤ 0.1 % of full scale with repeatability to < 3 µA or 3 mV, depending on current or voltage output selected. […]

RUD’s new Omega Drive is a new chain drive with a 180° wrap angle. From the Tecdos series, it is suitable for both linear and rotational motion — capable of rotating, lifting, and lowering loads in various on and offshore settings. Applications include shifting harbor and ship cranes, relocating machinery, and solar panel sun tracking. […]

Global precision motion control and nanopositioning supplier Physik Instrumente (PI) now sells a high-dynamics linear motor stage family — the V-574, a new series of linear positioning stages with guiding precision and frictionless three-phase linear motors. Equipped with high-precision crossed-roller bearings installed in a proprietary process, these stages achieve excellent geometric performance. The 130mm variant, […]

To meet the complex factory automation challenges of tomorrow, linear motion systems are evolving to become quicker, more economical, and more sustainable. Kevin Straub Bosch Rexroth Linear motion components are central to the functioning of a host of machines and mechatronic systems. They enable reliable guidance, precise positioning, and advanced handling capabilities. Such features are […]

The S-335 fast steering mirror (FSM) from Physik Instrumente (PI) provides fast and high-resolution motion in two degrees of freedom. Based on solid-state piezo drives, it’s well-suited for precise, high-speed laser beam control and high-resolution imaging applications. The S-335’s long angular travel range is made possible by a clever design using motion-amplified piezo actuators, operated […]

The R-09-150 CWN series of clockwise, reverse shaft extension rotary solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, feature 18 different winding configurations allowing users to match torque and duty cycle requirements to an application. These compact 38.1 mm (1.50 in.) diameter solenoids are just 22.1 mm (0.87 in.) long and have two […]

The SmartStage Open Frame Positioning Stage, a breakthrough innovation from Dover Motion, harnesses over 60 years of precision motion design and manufacturing expertise. The SmartStage Open Frame is the latest product in the SmartStage ecosystem of products, where the controller and encoder are physically integrated inside the stage structure. This design offers high performance and […]

The new N-332 nanometer-precision linear stage family from PI (Physik Instrumente) is configurable to multi-axis setups of XY, XZ and XYZ, is designed for high-end applications in semiconductor technology, fiber-optics, microscopy, bio-nanotechnology, metrology and scientific research in beamlines and laser labs. The stages have a low profile of 30 mm and a small footprint of […]

Measure angles or move to a precise angular position with a new series of high precision, low cost XYHG multi-axis stages that can be easily integrated into new and existing applications from OES (Optimal Engineering Systems). These XYHG (linear X-axis, linear Y-axis, plus horizontal goniometer) Linear Motion plus Goniometer Stages are available in stroke lengths […]

How linear motion solutions help one CNC machine manufacturer solve the problem of machining long drills.   Russell Riddiford  President of ANCA Americas  ANCA CNC Machines Linear motion components play a central role in CNC machines. From linear actuation to bearings to the drive and control system, these components are key to the motion system […]

Thomson Industries, Inc. has added advanced controllability options to its Electrak LL line of long-life electric linear actuators. In addition to the 600 km of maintenance-free life and 100 % duty cycle performance inherent to all the Electrak LL models, machine designers can now get absolute position feedback, CAN bus integration, reduced current flow and […]

New intermediate size of the proven planetary screw assembly from Bosch Rexroth achieves double the linear travel speed and cycle time at the same rotary speed New intermediate size 48×20 for high-power applications Higher transmission ratio shortens cycle times and increases productivity Quick product selection and online configuration using e-tools The ongoing trend towards electrification […]

Actuonix Motion Devices recently launched its new T16-R series linear track servo, a variant of its T16 track actuator line and the most powerful linear track servo the company offers. Designed for applications where side load is essential and mounting space is limited, the T16-R provides a versatile and efficient solution for engineers and designers. […]

Actuonix Motion Devices recently launched its new T16-R series linear track servo, a variant of its T16 track actuator line and the most powerful linear track servo the company offers. Designed for applications where side load is essential and mounting space is limited, the T16-R provides a versatile and efficient solution for engineers and designers. […]

Leadscrews are essential to surgical robotics, patient-monitoring systems, diagnostic imaging devices, and rehabilitation equipment. Leadscrews are those spiral shafts that (upon application of torque) convert rotational motion into linear motion — axially advancing and receding a mating nut to deliver accurate positioning. They’re well suited to medical equipment as they come in a variety of […]

Leadscrews are essential to surgical robotics, patient-monitoring systems, diagnostic imaging devices, and rehabilitation equipment. Leadscrews are those spiral shafts that (upon application of torque) convert rotational motion into linear motion — axially advancing and receding a mating nut to deliver accurate positioning. They’re well suited to medical equipment as they come in a variety of […]

The demand for a high accuracy, robust, open-frame stages is met with IntelLIDrives dual-axis, large aperture stages that address the unique needs of scanning microscopy, wafer and printed circuit board inspection, automated assembly and a wide range of specimens and samples scanning in many types of imaging techniques and applications. Features of these dual-axis large […]