Motors (direct-drive) + frameless motors

U.S. electric motor design software firm ECM and global gaming leader Thrustmaster have announced a partnership on the development of products integrating ECM’s PCB Stator technology. To highlight the collaboration, ECM has released a case study on Thrustmaster’s T598 simracing wheel, which incorporates an optimized motor designed on ECM’s award-winning PrintStator platform. A first of…

How will the drive actually behave in the real-life application? For brushless DC-motors from FAULHABER, this question can be answered without any hardware whatsoever. They were recently added as virtual modules to a library and can be integrated into modeled applications using the simulation software Simulink. The simulated behavior serves as an indicator for the…

Modern machine design is all about delivering higher performance at a lower cost with higher reliability. Delivering these often-conflicting performance characteristics is the mark of a great designer, and for the most common form of industrial motion, rotation, newer applications such as SCARA robots and their end effectors need torque with low mass in the…

Rexroth offers a comprehensive range of motors that deliver high performance and a wide variety of types, designs, and capacities. When paired with its servo drive system, these robust motors enable both standard and high-end applications in modern factory automation — intelligent, highly dynamic, precise, and reliable. The portfolio is further enhanced by special explosion-proof…

LogiDrive complete drive solutions from NORD DRIVESYSTEMS reduce planning and commissioning efforts through cost-effective, standardized designs engineered to industry standards and application requirements. These solutions are aligned with the intralogistics and material handling of the Post & Parcel, Airport, and warehouse logistics industries. There are advanced versions for each intralogistics area using IE5+ synchronous motor…

Oriental Motor USA announces the release of the new electric gripper EH Series 3-Finger Type. This new 3-finger type electric gripper can gently grip irregular-shaped objects, such as spheres and cylinders, like human fingertips. The key features of the new electric gripper EH Series 3-Finger Type: Equipped with an αSTEP AZ Series Motor Suitable for…

Celera Motion, an award-winning business unit of Novanta Inc., today announced a new version of its innovative direct drive motor platform, the Omni+TM Series. The Omni+ 130 mm motor becomes the largest of the series, known as the world’s most advanced direct drive frameless motor kits. All offer the highest torque density and ultra-low cogging…

AutomationDirect is proud to announce the addition of WEG brand motors to their existing motor portfolio. With this launch, several general-purpose 1- and 3-phase motors from ¼ to 3 hp have been added, as well as certain high-performance inverter duty motors from ½ to 1 hp, motors certified for hazardous locations (Class I, Div 2,…

With the recent COVID-19 outbreak, demand for medical equipment has quickly risen. Many such devices incorporate precision electric motors. To support efforts to combat COVID-19, Lin Engineering — a designer and manufacturer of precision electric motors and motion systems — is prioritizing the production and supply of motors to support companies making medical devices critical […]

In this contributed piece, Kollmorgen engineers describe environmental factors to watch for that could affect the performance of robot motors, gears, and sensors.

Here we outline leading factors affecting the longevity and performance of industrial robot joints. This feature was  contributed by Kollmorgen engineering staff. Links refer to supporting research listed at the feature conclusion. Recent years have seen continuous demand in numerous industries — automotive manufacturing to computer, communication, and consumer electronics (3C) product fabrication — for […]

Collaborative robots are seeing exponential rise in use. “This trend is a perfect example of the so-called fourth industrial revolution or Industry 4.0 … a term defined by chairman of the World Economic Forum Klaus Schwab. It’s blurring lines between digital, physical, and biological spheres,” said Jonas Proeger of Trinamic Motion Control. Some of these […]

Automated mobile equipment, which transports items in warehouses and freight centers as well as assembly operations, continues to boost demand for power-transmission and motion control systems. In fact, the worldwide mobile-robot market will reach nearly $15 billion by 2026, according to researchandmarkets.com. Almost all run off electric-motor drivetrains that are relatively expensive upfront but with […]

Sponsored content by William Fang • Engineer | Chieftek Precision USA Chieftek Precision USA sees six trends in automation that are changing which kinds of motion components get used in new installations. Leading technologies include linear stages, linear encoders, servo drives in flexible formats, linear slides, direct-drive rotary tables, and linear motors. Pre-integrated linear stages…

KNF’s new FK 1100 diaphragm liquid pump is one of the most advanced solutions on the market for gentle, low-pulsation flow. The 12 L/min flow rate doubles KNF’s previous maximum for liquid diaphragm pumps. This pump is robust, adjustable, and offered in a variety of application-friendly materials. The FK 1100 has only one inlet and…

Keynotes | Speakers | Exhibitors | Register The new EC-i 52XL 200-W brushless servo motor from maxon motor features a flux collector rotor which provides outstanding torque performance compared to the existing EC-i 52 180-W high torque motor. Especially on the industrial automation front, when space is limited but high torque and dynamics are required,…

The new EC-i 52XL 200-W brushless servo motor from maxon features a flux collector rotor which provides outstanding torque performance compared to the existing EC-i 52 180-W high torque motor. Especially on the industrial automation front, when space is limited but high torque and dynamics are required, the maxon EC-i 52XL motor with its extended […]

In order to simplify the implementation of liquid cooling with torque motors and ease the mounting into direct-drive machine applications, ETEL announces that their TMB+ torque motor can now be ordered with a closed cooling jacket pre-built around it. For over a decade, ETEL has been producing high quality frameless torque motors that are used […]

Drive systems based on parallel kinematics with electromagnetic and electro-ceramic drives can improve dynamics, resolution and accuracy in applications needing high precision and multiple degrees of freedom. Stefan Vorndran, Vice President Marketing Scott Jordan, Director of NanoAutomation Technologies, Physik Instrumente L.P. (PI) Motion simulation is often a crucial piece of the design process for evaluating […]

H2W engineers have developed a compact high force brushless linear motor (BLSM-1F) that can generate 300 lb (1330 N) at a 10% duty cycle and 100 lb (444 N) at a 100% duty cycle, and, when used with a matching magnet track (BLST-FSX). The mass of the coil assembly is 19 lb (9 kg) which […]

The QTR motor family from Tecnotion, long known as “The Linear Motor Company,” entered the rotary torque motor market last year with a new design for torque motors. The new design means the magnetic design is optimized for maximum flux density and copper fill to provide high torque to volume ratios. Manufactured in volume, these […]

H2W Technologies has developed several high torque rotary voice coil actuators, otherwise known as a limited angle torque motors or LATs. The model TWR-015-346-2RC was designed to allow for a low moving mass (68 grams per coil) and inertia, as well as dual independent coils to allow for two independent motion profiles or couple the […]

H2W Technologies has developed several high-torque rotary voice coil actuators, otherwise known as a limited angle torque motors or LATs. The model TWR-015-346-2RC was designed to allow for a low moving mass (68 g per coil) and inertia, as well as dual independent coils to allow for two independent motion profiles or couple the coils […]

Direct drives are a motion-control technology projected to see high rates of adoption in coming years, according to market research by the ARC Advisory Group. That’s due in part to an array of industries driving for higher throughput and more accurate processes. According to Brian Scott, applications engineer at Nippon Pulse America Inc., linear shaft […]

PI (Physik Instrumente) will show its latest rotary air bearing stage series at this year’s LAM/LME (Laser Additive Manufacturing / Laser’s for Manufacturing Event) show on March 27/8 in the Schaumburg Convention Center. PI’s new A-635/A-637 PIglide low-profile stages have no rolling or sliding elements and deliver frictionless, non-contact motion, resulting in negligible reversal error, […]