Simulation

See how engineers and scientists are using multiphysics simulation for product development, the democratization of simulation, and design optimization. Download this collection of 12 stories here. Download Now Please see www.comsol.com/privacy for COMSOL’s Privacy Policy. Contact COMSOL at www.comsol.com/contact for more information. Note that COMSOL will follow up with all registrants about this event and…

The formula for a successful business revolves around the problems it’s able to solve. Recognizing pain points for potential customers is key, but the formula for how those issues are addressed is what differentiates an average product from a great one. When it came to mountain bikes, many brands in the world were building good…

It’s rare to see product development efforts these days that don’t involve design software modules spanning multiple disciplines. The new challenge is getting work done without making a career out of formatting the output of one package for the input of another. Kaelly Farnham, Keysight Technologies Modern electronics are pushing the limits of electronic design…

If you’re attending the Robotics Summit/DeviceTalks Boston 2019, look for Festo solutions that reduce engineering effort for state-of-the-art robotic systems — including laboratory automation. Festo will also show a hands-on bionic learning kit at Booth #216 for middle and high school students. Topping off its display, Festo will fly its Bionic Learning Network flying insects…

Free programs that seem to behave like LabVIEW engineering software have become available. Here’s what’s behind the user interface. Leland Teschler, Executive Editor Since 1986, engineers working in test instrumentation have been able to use a program called LabVIEW developed by National Instruments Inc. LabVIEW is well-known for its graphical user interface which lets users…

International TechneGroup Incorporated (ITI) announces a one hour online workshop titled, “Recommendations for Planning, Designing and Implementing Model-Based Design (MBD) / Model-Based Manufacturing (MBM).” The workshop is derived from ITI’s latest white paper written in conjunction with Dave Baum, formerly of Raytheon. Baum has led the development and commercialization of new products in a variety…

Schaffner EMC introduces PQS, a Power Quality Simulation tool which allows planners, consultants and application engineers to accurately model and simulate low voltage 3-phase network topologies. This powerful…

Power Electronic Tips

B&R is expanding its mapp technology portfolio to include robot-kinematics functions for all the most common robot kinematic systems. Not only does this allow users to commission robots…

The post B&R mapp technology now includes robot-kinematics functions appeared first on Robotic Tips.

Students around the world now have free access to the same leading engineering simulation solutions used by top organizations and professional engineers to create the most advanced products on the planet, thanks to ANSYS (NASDAQ: ANSS). Released today, ANSYS® Student is a free, introductory academic software package for students interested in learning the fundamentals of…

Using the newly released ANSYS® (NASDAQ: ANSS) 16.2, engineers can now create virtual prototypes of complete systems, enabling them to make significant strides in innovation and to unleash next-generation products within their industries. As products – from automobiles to smartphones to wearable technology – become more complex and development times continue to shrink, the need…

This webinar will provide guidance to attendees on how to drive more engineering decisions using simulation tools. Today, there are lots of different options. You can provide automation tools to simulation analysts to improve their productivity or you could provide CAD-embedded simulation tools to engineers for early simulation feedback on a daily basis. What is…

Heat management takes on a unique role in outer space, especially for cryogenic systems that demand extremely low temperatures in order to detect thermal radiation. This was a challenge faced by the engineering team at SRON Netherlands Institute for Space Research when designing the SpicA Far-InfraRed Instrument (SAFARI), an infrared camera that measures the complete…

by Chris Francis When designing low noise circuits – signal conditioning circuits, amplifiers or analog to digital converter interfaces, for example – SPICE simulation can be helpful in…

The post Noise simulation and analysis with SPICE appeared first on Analog IC Tips.

MathWorks has announced the introduction of Simulink Real-Time into the Simulink product family. Available with the company’s Release 2014a (R2014a), Simulink Real-Time enables engineers to build, test, and run real-time applications from Simulink models on dedicated target computer hardware connected to their physical systems, providing a complete end-to-end real-time simulation and testing solution. Combining the…

By Leslie Langnau, Managing Editor On the evening of April 20, 2010, Deepwater Horizon suffered a blowout while drilling in the Macondo Prospect, an area in the Gulf of Mexico 40 miles off the southeast coast of Louisiana. The platform caught fire; two days later, it sank. Many attempts were made to seal the well,…

By Leslie Langnau, Managing Editor Automation Builder is an engineering development tool-suite to help you integrate the build of control and motion systems based on PLCs, safety PLCs, robots, motion control, and related automation components. Combining all of the tools required for configuring, programming, debugging and maintaining automation projects from a common intuitive interface, it…

by Evan Yares, Senior Editor & Analyst, Software In 1964, NASA undertook a review of its structural dynamics research program. At the time, its research centers were each separately developing structural analysis software to meet their own specific needs. The review recommended that a single generic FEA (finite element analysis) program should be developed, to…

Meshing for FEA and CFD is simple: Just start with your CAD model, break it up into a bunch of small pieces, and you’re all set to go. Provided, of course, that you don’t mind getting totally bogus analysis results. It’s more fair to say that the general concepts of meshing are simple, but that…

Historically, the primary role of simulation has been in optimization and validation—things that tend to be done late in the product development process. It’s been generally recognized, for quite a long time, that there is real value to be gained in moving simulation up earlier in the process, to the detail design phase. Many commerical…

By Evan Yares, Senior Editor Will the availability of the high-performance cloud computing help drive use of CAE tools? The biggest problem with Computer Aided Engineering (CAE) is that too few people use it. There are several good reasons, but one that’s significant is money. CAE software licenses, and the big computers on which to…

By Evan Yares, Senior Editor & Analyst, Software Adams/Machinery makes analyst-level simulation practical for the rest of us. For engineers who build high-performance machinery, today’s CAD systems are a mixed bag. Most mainstream CAD programs include tools to evaluate part interference, and do kinematic motion studies. They often include closely integrated FEA, for studying linear…

Mentor Graphics couples its tools for component and system-level CFD CFD was once the exclusive realm of analysts with deep theoretical backgrounds and extensive experience. While those analysts still rule the realm, they’re no longer alone. The growth of early (often called “upfront” or “concurrent”) CFD tools has opened the field up to a new…

by Evan Yares, Senior Editor & Analyst, Software It’s more about domain knowledge than software ease of use A shift in CAE software started, quite a long time ago, when SolidWorks started including a basic version of Cosmos FEA with their eponymous CAD package. It was the beginning of the “red is bad, green is…

Multiphysics has earned the reputation as an excellent approach for simulation in engineering and science. Applying multiphysics simulation early in the product development process brings you reliable computer models to verify and optimize your designs This webinar will demonstrate how the COMSOL LiveLink for SolidWorks bridges the gap between design and analysis, integrating real-world simulation…

Finite Element Analysis has been around for a long time. Better than 50 years. Though it took awhile for computers to catch up with the processing and memory demands of FEA, today’s average PC is up to the task, even for challenging problems. Why, then, is FEA still thought of by many engineers as a…