“Advancing additive manufacturing is something I’ve been a proponent of for the past few years. I believe it will change how we fundamentally manufacture in our sport,” said Michael Leavine, vice president of Leavine Family Racing.
Leavine Family Racing raced the No. 95 Toyota Camry in the NASCAR Cup Series from 2011 to 2020. The team completed the 2020 NASCAR Cup Series season with a top 20 finish, with Rookie of the Year contender Christopher Bell behind the wheel.
Leavine had been using 3D printing for the team’s race cars for years, initially discovering the technology when he looked for a cost-effective approach to making inch-wide pucks used to fill holes in the splitters on the cars, which is a sensitive aerodynamic component on the cars that offers an improvement in performance, instead of buying them from a vendor. The injection-molded pucks were typically five dollars each and used only once before being discarded. Leavine bought a lower-end 3D printer online and started printing the pucks in-house with PLA material, ultimately saving the team $20,000-$25,000 a year.
After that, he started to explore other applications in racing with 3D printing, such as prototyping fitment and fabricating fixtures.
Leavine selected the MakerBot METHOD X 3D printer for its portfolio of materials and advanced thermoplastics suitable for both rapid prototyping and end-use parts. METHOD’s ability to print at extremely high temperatures was also a benefit for Leavine, who needed materials with high strength and high heat resistance for demanding parts. The team opted for three MakerBot METHOD X 3D printers, two for the garage and one that could be set up in Leavine’s office or taken on the road for use on-site at races.
“We selected the MakerBot METHOD X for its advanced capabilities. The METHOD X was one of the most advanced products on the market to create better, faster, and lighter parts through prototyping or some of the advanced materials that MakerBot offers,” said Leavine. “METHOD is one of the most sophisticated units on the market, from the ease of connectivity––we can run all three of our printers from our laptop––to the advanced materials we were able to use––from ABS to nylon carbon fiber––to the heated build chamber that ensures print accuracy and repeatability every time.”
With direct and immediate access to in-house 3D printing capabilities, the race car technicians quickly turned to producing prototypes and end-use parts themselves, reducing their dependency on external suppliers and saving both time and money. This had also enabled them to fully use the creativity of the people on the team.
“Our team had new ideas, new uses, and our use of 3D printing expanded from there. It became a daily thing for us and our printers were constantly running. We weren’t expecting 3D printing to become such an integral part of our production. We didn’t typically manufacture our own parts; we always bought from vendors. But then the capability came along where we were able to make our own parts and it opened our eyes to doing things better, faster, cheaper, and more efficiently,” Leavine added. “The ability to control the production process in-house, without having to manage outsourced vendors who also have demands from other clients, was critical. We were able to control everything, from the process, to the part quality, and more.”
Using METHOD, the team printed dummy camera pods that were mounted on the tail of the car. They were able to fabricate these housings so that they did not have to take the race-ready parts off the race car during the body fabrication process, which allowed them to save time in their production process and save on costs by not having to purchase parts from an external vendor.
The team also used METHOD to print the air intake duct inside the car, a driver cooling system used to bring fresh air into the vehicle and is essential to optimizing driver performance during races. It was important that this part was heat resistant because it was in a hot part of the car, but used to keep the driver cool during the race, which could affect the driver’s on-track production.
For this part, they used MakerBot Nylon Carbon Fiber due to its high strength and heat performance capabilities. Nylon carbon fiber produces strong and accurate parts, and can be used to print metal replacement parts in some applications. The METHOD X 3D printer’s heated chamber reaches up to 110 degrees Celsius, allowing parts to cool down gradually to avoid warping and curling.
Additionally, Leavine was able to test the printed parts quicker than if he outsourced his parts production.
He noted, “We conducted a lot of tests. We stress tested parts 200% beyond what they were going to see at the racetrack to see what was going to fail and when it was going to fail before it ever goes onto the track. Our process is more quality control and stress testing before it goes on a race car in a performance capability. If it’s a critical part and it fails, it can be the difference between winning and coming in last place. The need to be able to quality control and stress test parts and iterate rapidly is important.”
“We’ve been very happy with our collaboration with MakerBot. They helped us get up and running and get quality parts on race cars,” he concluded.
Filed Under: Make Parts Fast