Kübler presents its new generation of Industrial Ethernet encoders, which is technically and mechanically different from existing fieldbus encoders. Thanks to the new technical platform, the new Sendix F58 PROFINET IO encoders will also be integrated into PROFIdrive and PROFIenergy networks. The new generation also replaces the familiar fieldbus hood with the new design. This saves additional installation depth, which will be noticeable during integration in plants/machines.
Due to PROFINET IO, RT and IRT, the new Sendix F58 encoders can meet various performance requirements and thus be integrated. Isochronous mode is available for hard real-time requirements with clock cycles < 1 ms. The Sendix encoders are based on the latest encoder profile (V 4.2) and thus support all Profinet features. The encoder supports clock synchronous cycle times from one SendCycle up to 31.25 μs and one Jitter < 1 μs and is, therefore, the ideal solution for highly synchronous applications such as axis synchronization. The PROFIdrive profile enables interoperability between a wide variety of control and drive manufacturers. Optimization/reduction of energy utilization achieved with PROFIenergy features. Vertical communication, from the control level to industrial production plants, enables location-independent parameterization, remote diagnosis, and priority-supported process data exchange. Even maintenance interventions can be carried out in a time-saving manner. Like every Sendix encoder, the new Sendix F58 PROFINET IO also stands for the highest quality, robustness, and performance.
Filed Under: Encoders • absolute