PEM® self-clinching cable tie-mounts and hooks provide secure attachment points for mounting wires and cables to electronic chassis or enclosures. All PEM TY-D® hardware can install quickly and permanently without screws or adhesives. Their locations and positions can be specified during the design process to provide optimal layout for wires and cables during final assembly.
The family of PEM TY-D hardware includes Type TD™ cable tie-mounts and patented Type TDO™ hooks. Both types are RoHS compliant and offered in several sizes for installation in metal sheets as thin as .040”/1.02mm and thick as .125”/3.18mm.
Type TD tie-mounts allow users to slide ties easily through the hardware’s “eye” for fast cable mounting. Type TDO hooks enable users to attach, remove, and return tie-bundled wires at their mounting points when components need to be accessed for service or when wires or cables must be replaced. The hook feature allows ties to remain intact and wires to remain wrapped.
PEM TY-D hardware remains secure at designed locations and angles. Panels on the reverse side of installation remain flush and without any openings to minimize EMI/RFI and potential contamination of electronics by dust or dirt.
Filed Under: Cabinets • enclosures • control panels, Cables + cable management, Electronics • electrical, Fastening + joining • locks • latches • pins