Components for machines like DIN 705 locking rings, thick washers, and threaded ring nuts are essential in the assembling to stop and place a bearing or other components, or as a stop ledge. In steel fully turned. Good surface finishing with edge deburring. Burnishing or galvanizing surface treatments. Economic and available in stock. On request […]
DIN 705 locking rings from ComInTec
Components for machines like DIN 705 locking rings, thick washers, and threaded ring nuts essential in the assembling to stop, and place a bearing or other components, or as stop ledge. In steel fully turned. Good surface finishing with edge deburring. Burnishing or galvanizing surface treatments. Economic and available in stock. Primary applications Automatic machines. […]
ComInTec compact elastic coupling “GEC”
Up to 35000 Nm of torque and maximum bore 180 mm. Made in steel fully turned with standard treatment of phosphating. Maintenance without removing the coupling Suitable for working in high temperatures. Statically balanced, suitable to absorb vibrations. Highest protection. Excellent value torque/dimensions. ComInTec www.comintec.com/en/project
Spacer couplings from
Shafts “backlash” to connect in a simple and fast two or more components of a mechanical transmission far between. The size of the extension is customizable to obtain a specific DBSE with different types of locks on the trees. Lengths up to 3 meters without intermediate support. Compact and rugged. low inertia. High torsional stiffness. […]
Roller phase pneumatic clutch “DSR/F/AP” from ComInTec
A friction clutch or roller with torque adjustment even during operation. Ability to disengage the drive and driven by a pneumatic or electrical impulse. Low residual torque after disengagement. Calibration is adjustable by changing the pressure (pneumatic) air supply. Simple and precise calibration. Transmission engagement/disengagement and torque limiter functions. Reliability and repetitiveness of the calibration […]
ComInTec axial force limiter
Safety coupling with linear limitation of force. Releasing both compressive and tension once it reaches the calibration force. The setting force can be adjusted by turning the adjuster nut onto the springs and re-engagement is automatic. Possibility of connecting linear motion is also very distant from each other. No axial play. Protection in both tension […]
ComInTec rollers torque limiters
Safety coupling with the transmission of motion through rollers that allow complete disengagement when the calibrated torque is reached, permitting a quick stop of the transmission due to micro-EM1. Suitable for transmitting high torque with high reliability and compact size. * Precise torque setting by adjusting the radially balanced locking nut. * The innovative regulation […]
ComInTec announces new aluminum dedicated production line
NEW ALUMINIUM DEDICATED PRODUCTION LINE GAS/SG/DBSE-AL Backlash free jaw spacer coupling in aluminum Our brand new production line allows us to meet all your needs in terms of quality, quantity, and timing: Deliveries in 2-3 weeks Competitive prices Custom length 3D configurator 2 years guarantee About ComInTec Originally founded in 1967 by Dante Cavalli, today […]
ComInTec torsionally rigid spacer shaft coupling with flexible bellow element
Shafts “backlash” to connect in a simple and fast two or more components of a mechanical transmission far between. The size of the extension is customizable to obtain a specific DBSE with different types of locks on the trees. Lengths up to 3 meters without intermediate support Compact and rugged. low inertia. High torsional stiffness. […]
ComInTec “GD” gear coupling
The GD coupling is composed of two hubs in steel UNI EN 10083/98 fully turned, externally toothed, with a rounded profile and assembled only with a sleeve in polyamide stabilized resin, toothed internally. Due to the tooth profile with which the hubs and the sleeve are connected, you can obtain a high contact surface also […]
ComInTec friction pneumatic clutch “DSF/TF/AP”
Friction torque transmission. As tensioner, brake, and torque limiter. Constant adjustment of the calibration torque. Available with special friction rings for specific requirements. Available in version …/SI to stop the transmission after an overload. Torque range: 3 – 875 Nm; max. bore ø 65 mm. ComInTec www.comintec.com
Pneumatic clutches from ComInTec
A friction clutch or roller with torque adjustment even during operation. Ability to disengage the drive and driven by pneumatic or electrical impulse. Low residual torque after disengagement. Calibration is adjustable by changing the pressure (pneumatic) air supply. Simple and precise calibration. Transmission engagement/disengagement and torque limiter functions. Reliability and repetitiveness of the calibration torque. […]
ComInTec backlash free jaw spacer coupling
The coupling GAS/SG is an elastomeric coupling with compact dimensions composed of two hubs made in steel UNI EN ISO 683-1:2018, fully turned, and one elastomeric element. The hub’s tooth profile is designed to allow the elastomeric element to work only by compression and not in shear, allowing for a longer life of the coupling in […]
ComInTec chain coupling “GC”
Technical Data Made in steel fully turned with standard treatment of phosphating. Negligible power loss, absorbed by the coupling. Simple manufacturing. Hardening of hub teeth. Optimum quality/price ratio. Maintenance without moving the hubs axially. ON REQUEST Various hub connection types are available on the hubs. Specific surface treatments. Customized versions for specific needs. Connection to […]
New stainless steel line from ComInTec
– Ideal for the food, chemical, and pharmaceutical sectors – External applications – Maximum corrosion resistance – Application-specific versions – Made in Italy quality with a 2-year guarantee DF – SS Stainless steel friction torque limiter Ideal for OUTDOOR applications Sliding model Made of fully turned stainless steel Silent, vibration-free operation Simple torque adjustment […]
GAS/SG-ST -backlash free jaw coupling
The ComInTec coupling GAS/SG is an elastomeric coupling with compact dimensions composed of two hubs made in steel UNI EN10083/98, fully turned, and one elastomeric element. The hub’s tooth profile is designed to allow the elastomeric element to work only by compression and not in shear, allowing for a longer life of the coupling in […]
ComInTec torque limiters for gearboxes
DSS/F/SG/PR-V – backlash free ball model for gearboxes (input shaft): Balls solution, torsional backlash free, maintenance free Instant disengagement between the driver and the driven component when the calibration torque is exceeded Available with 360° individual re-engagement Solution complete with zinc-plated STEEL connection flange for IEC and NEMA motors IP67 level of protection from external […]
ComInTec economic ball torque limiters
Safety coupling with the transmission of motion by means of hardened balls inserted directly in the drive element, obtaining a simple, compact and competitive device. The disengagement occurs quickly and safely allowing the stop of the transmission if the calibrated torque is exceeded. * Reduced torsional backlash by ball drive. * Maintenance-free for long-lasting, high […]
ComInTec GSF bellows coupling
The GSF bellow couplings have been designed and manufactured for all applications requiring excellent dynamic characteristics, necessary for high speeds, fast reversing, and, at the same time, torsional rigidity with low inertia without compromising the high reliability. The coupling is made in three different and modular elements, in order to obtain high flexibility in assembling […]
Elastomeric jaw coupling from ComInTec
Hexelus presents the GAS family of Elastomeric Jaw Coupling by ComInTec * Strong vibration dampening properties * Made in fully turned steel or aluminum – NOT cast or sintered metal * Elastomer Available in different hardness * Statically Balanced * Modular components with different locking systems on the hubs * Maximum Torque: 9,600 Nm (85,000 […]