The 1597DIN family of UL94-V0 flame-retardant plastic enclosures mount to standard IEC/EN 60715 35-mm DIN rails for applications such as industrial control equipment, automation, equipment management and monitoring, HVAC controllers and distributed IoT equipment. The family consists initially of four sizes: 2, 4, 6 and 9 standard 17.5-mm module widths. All sizes have two mounting…
Hammond adds 36 additional configurations to its IP68 1554 and 1555 Industry 4.0 families
Hammond Manufacturing has added 36 new configurations to its popular Industry 4.0 1554 and 1555 sealed enclosure families. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the six new sizes are 4.13 x 4.13 x 2.36 and 3.54 inches (105 x 105 x 60 and 90mm), 5.51 x 5.51 x 2.36 and 3.54 inches (140 x…
19-in. rack mount and stand-alone power distribution strips are released
Hammond Manufacturing has extended its power distribution offering with an additional 12 variants of rack mounting and stand-alone 100 – 240VAC, 50/60Hz 10A power strips, designed for use with IEC power cords. For enhanced safety, two 10A resettable circuit breakers prevent overloading, and both types are available with either a double pole single throw green…
Wall mount steel enclosures for harsh environments
The HWHK Series, from Hammond Manufacturing, is a family of easy to open, yet secure, wall mount enclosures designed to house electrical and/or electronic equipment in harsh industrial environments. Available as standard in 30 sizes in six heights from 24 to 60 in., five widths from 16 to 36 in. and five depths from 6…
Hammond’s HJ Series ticks all the boxes
Hammond Manufacturing has introduced its new HJ H Series, a family of hinged cover metal enclosures, environmentally sealed to NEMA Type 3R, 4 (IP66), 12 and 13. Designed for wall or bulkhead mounting, the HJ H Series is ideal for housing electrical and electronic equipment in installations where dust and/or water protection is required. The…
Polycarbonate enclosures for indoor and outdoor use
Hammond Manufacturing has launched the PCJ Series, a family of polycarbonate enclosures designed for housing electrical and electronic equipment in installations where NEMA 4X (IP66) environmental sealing for dust and water protection is required. The screw-down cover versions meet the higher NEMA 6P sealing requirements. An initial five sizes, ranging from 5.93 x 6.16 x…
Hammond Manufacturing launches online enclosure configurator
Hammond Manufacturing has introduced an online configuration tool for its HME Series of modular freestanding enclosures, the Q-Assembly service. The tool is simple and logical to use. It guides the specifier from the initial selection of the required cabinet design and its size, though the selection of options and accessories to the generation of a bill…