Nano Dimension Ltd. has signed an agreement with Tethon Corporation Inc. to develop new materials for its Fabrica 2.0 micro-additive manufacturing system. The agreement is focused on materials with high-performance and specialty specifications, including high temperature, transparent, and carbon nano tubes. Development of materials, along with breakthroughs in deep learning-based AI and releasing next-generation systems […]

Nano Dimension Ltd. announced that it has signed and closed a definitive agreement to acquire Formatec Holding B.V (“Admatec/Formatec”), which includes its two subsidiaries – Admatec Europe B.V. (“Admatec”) and Formatec Technical Ceramics B.V. (“Formatec”). Admatec/Formatec, based in the Netherlands, are comprised of two complementary businesses operating together, which were part of the U.S.-based Precision […]

J.A.M.E.S., or ‘Jetted Additively Manufactured Electronics Sources’, announced the global launch of the FrAMEwork platform to bring together the growing community of designers of Additively Manufactured Electronics (AME). This joint venture between Hensoldt and Nano Dimension was founded to advance the development of AME through a collaborative space that delivers technical know-how, design enablement and […]

Nano Dimension Ltd. announced a collaboration with TTM Technologies, Inc. (“TTM”) to open its first AME NanoLab at TTM’s Advanced Manufacturing Center in Stafford Springs, CT. The AME NanoLab Network will enable customers and researchers to actively experience the AME workflow in two steps, from design to final prototype. This network of labs will allow […]

Nano Dimension Ltd. announced a collaboration with XTPL S.A. to develop new nano-particle based conductive ink. Nano Dimension and XTPL will focus on the development of new nano-particle conductive ink for AME applications, enabling high conductivity and high-performance material suitable for 3D electronic printing technology for ultra-precise delivery of nanomaterials. Filip Granek, Chief Executive Officer […]

Nano Dimension Ltd. announced the acquisition of Global Inkjet Systems Ltd. (GIS). GIS, based in Cambridge, UK, is a leading developer and supplier of high-performance control electronics, software, and ink delivery systems. Founded in 2006, the company is known for inventing and delivering state-of-the-art 2D and 3D printing inkjet hardware and operating software. GIS has […]

Nano Dimension Ltd. introduces its new DragonFly IV printer and FLIGHT software platform. DragonFly IV is a Dielectric & Conductive-Materials Additive Manufacturing System aimed for the fabrication of High-Performance Electronic Devices (Hi-PEDs) by depositing the proprietary materials simultaneously, while concurrently integrating in-situ capacitors, antennas, coils, transformers, and electro-mechanical components. DragonFly IV delivers improved accuracy of […]

Nano Dimension Ltd. (Nasdaq: NNDM), an industry leader in Additively Manufactured Electronics (AME) / 3D-Printed Electronics (PE), and Micro Additive Manufacturing (Micro-AM), announced today that it has signed and closed a definitive agreement to acquire Essemtec AG based in Lucerne Canton, Switzerland. ESSEMTEC’s product portfolio is comprised of production equipment for placing and assembling electronic […]

Nano Dimension Ltd. (Nasdaq: NNDM), an industry-leading Additively Manufactured Electronics (AME) and Printed Electronics (PE) manufacturing system provider announced today that Nanofabrica Ltd. and its 3D additively manufacturing (AM) printing system have been officially renamed following the acquisition by Nano Dimension in April 2021. It is now known as “Nano Dimension’s Fabrica Group”, and its […]

Nano Dimension Ltd. (Nasdaq: NNDM), an industry leading Additively Manufactured Electronics (AME)/PE (3D-Printed Electronics) provider, announced that it has formed a partnership with HENSOLDT AG (www.hensoldt.net), a global high-tech pioneer for defense and security electronics and a market leader in civilian and military sensor solutions. The recently formed joint venture entity is named J.A.M.E.S GmbH […]

Nano Dimension Ltd. (Nasdaq: NNDM), an industry leading Additively Manufactured Electronics (AME)/PE (Printed Electronics) provider, announced today that Sean Patterson will join as President of Nano Dimension – Americas and will report to Zivi Nedivi, Global President of Nano Dimension. Patterson will head the expansion of Nano Dimension’s U.S. operations and execute on the Company’s […]

Nano Dimension Ltd., an industry leading provider of Additively Manufactured Electronics (AME)/PE (Printed Electronics) systems, announced the launch of its next-generation DragonFly LDM 2.0 system, a comprehensive update to the flagship product that introduces improved print quality, optimized ink utilization and smarter management for printer uptime. The DragonFly LDM system uses digital files and simultaneous […]

Nano Dimension Ltd., an industry leader in Additively Manufactured Electronics (AME) / PE (Printed Electronics), announced that it has established the AME ACADEMY, with the participation of other industry-leading suppliers. Nano Dimension will serve as the co-host of the AME Academy sessions, an industry-first educational series that will educate corporate professionals, as well as individuals, […]

Nano Dimension Ltd., a leading Additively Manufactured Electronics (AME)/PE (Printed Electronics) provider, announced today that it has successfully achieved the RoHS 3 certification. The certification confirms that the dielectric and conductive inks used by the DragonFly LDM System for additive manufacturing of electronics are recyclable as well as non-hazardous and non-polluting. In addition, it assures […]

The use of 3D printing technology to build devices with embedded electronics has evolved. In the early days, special 3D printers injected dielectric inks onto a layer of a build, creating electronic traces, to build electronic parts. Nano Dimension was the first company to develop such a system, and it continues to evolve the technology. […]

The key to this breakthrough is the specially developed inks. Sensor solutions provider Hensoldt, using newly developed dielectric polymer ink and conductive ink from Additively Manufactured Electronics (AME)/Printed Electronics (PE) provider Nano Dimension, assembled a 10-layer printed circuit board (PCB) that carries high-performance electronic structures soldered to both outer sides. Until now, 3D printed boards […]

Nano Dimension Ltd., a leading Additively Manufactured Electronics (AME)/PE (Printed Electronics) provider and REHAU, a worldwide-leading polymer manufacturer, announced that they succeeded in printing a 3D touch sensor. With the 3D electronic device, the premium polymer products from REHAU can be transformed into back-lit human-machine-interface surfaces. Thus, functionality and convenience are increased – all with […]

Nano Dimension Ltd., a leading Additively Manufactured Electronics (AME) provider, announced the appointment of Mr. Yaron Eitan as a member of the company’s Board of Directors, effective immediately. Mr. Yaron Eitan is a technology entrepreneur, founder and investor with over 30 years of experience building and running privately held and publicly traded companies in the […]

Nano Dimension Ltd., a leading additive electronics’ manufacturing provider, announced the appointment of veteran turnaround executive, Yoav Stern as President and Chief Executive Officer, effective January 2, 2020. He will be succeeding the co-founder and current CEO Amit Dror, who is taking the executive role of Customer Success Officer reporting directly to Mr. Stern. Mr. […]

The Center for Biomolecular Nanotechnologies (CBN) of the Istituto Italiano di Tecnologia (IIT), is using a DragonFly additive manufacturing system to 3D print embedded sensors in electrical packaging. IIT is a leading research institute in Italy with the mission of promoting technological development and higher education in science and technology. IIT plans to use the […]

Nano Dimension Ltd., announced it has developed 3D printed capacitors with the DragonFly additive manufacturing system. These capacitors are embedded in the body of the additively manufactured printed circuit boards (PCBs), saving space and eliminating the need for assembly. This breakthrough in the additive manufacturing of electronics validates the manufacturing applicability of built in capacitors […]

Nano Dimension Ltd., a leading additive electronics provider announced that the Manufacturing Technology Centre (MTC) became the first R&D facility in the United Kingdom to purchase Nano Dimension’s DragonFly LDM precision additive manufacturing system for electronics. MTC will use the Lights-Out Digital Manufacturing System to additively build electronic components, such as multi-layer printed circuit boards […]

Additively manufacturing functional circuits round-the-clock with little or no operator intervention is possible with the new DragonFly LDM precision additive manufacturing system from Nano Dimension. LDM stands for Lights-Out Digital Manufacturing. This 3D printer will build electronic components such as multilayer Printed Circuit Boards (PCBs), antennas, sensors and so on, round-the-clock, enabling Nano Dimension to […]

Nano Dimension Ltd., a leading additive electronics provider for electronics (NASDAQ, TASE: NNDM), announced a strategic collaboration with HENSOLDT, a leading global security and defense electronics firm. Under this collaboration, HENSOLDT’s engineers will work closely with Nano Dimension’s engineering team to develop applications for Hensoldt’s security and defense business. HENSOLDT, which was one of the […]

Nano Dimension Ltd., a leading 3D additive manufacturing provider for electronics, announced that it has created a fully functional, 3D printed communication device at a faster speed than has been achieved with traditionally made devices. This additively manufactured IoT enables companies and research institutions to create and test their ‘smart’ products and other prototypes quickly […]