By Gil Lavi, Founder & CEO 3D Evaluate The first time I heard the term “micro 3D printing” was a couple of years ago when I saw an image on LinkedIn presenting a tiny 3D printed part on a finger. “Incredible,” I thought to myself, “such a small part and so accurate with an amazing […]

The Tera 250 Micro AM technology introduces a process change that overcomes issues related to the reliance on legacy technologies when seeking to manufacture smaller parts while retaining sub-micron tolerances. Recently, Nanofabrica produced a reproduction of a DNA helix that has astounded professionals and which exemplifies the 3D printer’s ability to produce parts of mind-boggling […]

When you have a need for micro-sized parts, one 3D printer that can meet this need is the Tera 250 AM system, from Nanofabrica. Like other 3D printers, this additive system is agile and flexible. The need for tooling is usually minimal so designs can be altered with little expense. However, this system offers the […]

Micro 3D printing technology innovator Nanofabrica released information recently about produced parts that illustrate the precision and tolerances achievable through the use of its Tera 250 AM system. Existing at the interface of 3D printing for production and the industry-wide drive towards miniaturization, Nanofabrica’s industrial micro 3D printing technology helps designers and manufacturers exploit the […]

Micro 3D printing technology innovator, Nanofabrica, is proud to announce that additive manufacturing influencer Avi Cohen has joined the company as Executive Vice President of Sales. Nanofabrica exists at the interface of micro and additive manufacturing, and through hardware, software, and material innovation presents industry with a technology for the manufacture of micro parts or […]

Through the use of Nanofabrica’s technology, micro manufacturers can realistically assess a shift to additive manufacturing (AM) from conventional manufacturing processes. OEMs can therefore benefit from the inherent advantages that AM offers in terms of promoting part complexity with no increase in cost, eliminating the needs for expensive tooling, reducing part counts and the need […]

The promotion of true mass customization through the use of 3D printing has long been seen as a game-changer in the field of manufacturing, and the ability to produce individual products with unique characteristics in a timely and economic way in some situations is vital. In the area of medical device manufacturing, for example, the […]

There is a compelling drive towards the use of additive manufacturing (AM) to manufacture mold tools. Here’s a look at one technology for micro mold tooling. Jon Donner, CEO, Nanofabrica As AM matures as a process not just for prototyping but for true production applications, there is an excitement about what the future may hold […]

Nanofabrica has been highly pro-active in the last few weeks in light of the emerging COVID 19 pandemic and has reached out to professionals involved in the front-line fight against the disease to offer up its support for new protective and diagnostic solutions. In a recent virtual roundtable, Nanofabrica invited interested parties from around the […]

I spoke to Jon Donner, PhD, CEO and founder, Nanofabrica through a Zoom video meeting about how his company is fighting through the COVID-19 crisis. Check out the video below.     [Lightly edited transcript follows …] Paul Heney: Hi, I’m Paul Heney, VP and editorial director for Design World, and today as part of our…

Nanofabrica, a manufacturer of 3D printers for precision engineering, invites researchers, doctors and manufacturers to harness its manufacturing capabilities to develop COVID19 related medical devices and solutions. The company will host a virtual roundtable on Wednesday, March 25th, at 16:00 GMT+2 and invites all interested parties to join a brainstorming session on how we can […]

Micro additive manufacturing (AM) technology developer, Nanofabrica, recently achieved success in trials of its development of direct rapid soft tooling (DRST). The company accomplished a breakthrough that enabled the printing of a mold that lasted 20 shots, with plans to increase this to 1000 shots in the coming months. In its recent experiments, Nanofabrica (which […]

The ability to 3D print single micron resolution parts in mass quantities was a challenge until recently. Thanks to several technical innovations, however, it is now possible. The innovations needed came in hardware, software, and materials. Nanofabrica is a developer of micro additive manufacturing platforms. The hardware the company uses consists of a digital light […]

Nanofabrica’s additive manufacturing (AM) platform may be the first micron-level resolution AM technology that operates cost-effectively and repeatably, making it an industrial production alternative to traditional manufacturing processes such as micro moulding. Micron resolution can be achieved on centimetre-sized parts, and thousands of parts and components can be made in a single build, making the […]

A new technology exists at the intersection of additive manufacturing and micro manufacturing. It is opening up the possibility for manufacturers to take advantage of the inherent advantages of AM while achieving micron level accuracy over a build envelope of 5 x 5 x 10 cm. Jon Donner, CEO, Nanofabrica There are two current global […]