Pepperl+Fuchs introduces the R2000 Detection Laser Scanner. Smaller than most coffee mugs, these 2D laser scanners feature a 360-degree gapless measurement angle with angular resolution within 0.071 degrees, scan frequency to 30 Hz and object detection down to 1 mm. An eye-safe visible red laser simplifies alignment and, because the light spot is up to…
New Miniature Diffuse Mode Photoelectric Sensors from Pepperl+Fuchs
Pepperl+Fuchs has added three high performance diffuse mode sensors to its family of user-friendly and field-proven ML100 Series photoelectric sensors. These new versions are designed to provide advanced…
Pepperl+Fuchs’ F31K2 valve position sensor
The F31K2 sensor is part of Pepperl+Fuchs’ open solutions concept for valve position feedback. It is based on simple designs that can be used in a wide variety…
New LED Scanner R2100 from Pepperl+Fuchs
The R2100 combines Pepperl+Fuchs’ exclusive Pulse Ranging Technology (PRT) with Ultra-IR LEDs and Multi-Beam Scan. This technology combination delivers two-dimensional measurement over an entire area rather than just one point to ensure precise and reliable distance measurement and detection of irregular surfaces. As a result, it is an ideal solution for challenging indoor and outdoor…
Pepperl+Fuchs’ New PMI Linear Inductive Sensors
Pepperl+Fuchs introduces two new PMI40 models to its family of PMI linear inductive sensors. PMI40-F90-U-V15 and PMI40-F90-I-V15 sensors offer a 40 mm distance measurement ideal for vertical valve…
All New FieldBarrier Isolated Device Coupler from Pepperl+Fuchs
The Pepperl+Fuchs fieldbarrier revolutionized the fieldbus industry – the all new FieldBarrier R4D0-FB-IA is a diagnostic-enabled isolated device coupler for FOUNDATION Fieldbus H1 and PROFIBUS PA instruments. The very compact FieldBarrier is DIN rail mounted in Zone 1/Div.2 environments and connects 8 … 12 instruments with intrinsic safety in Zone 0… 1/Div.1 environments. The FieldBarrier…
Ultrasonic Sensors from Pepperl+Fuchs Provide Pushbutton Programming
Pepperl+Fuchs introduces Series IO Ultrasonic Sensors. These IO-Link compatible sensors establish a new level of versatility and convenience with simple pushbutton programming. Pushbutton programming provides fast and easy…
New Hazardous Area Encoder from Pepperl+Fuchs
The new 78E Series Ex Encoder from Pepperl+Fuchs is especially designed for applications in hazardous areas. The 78E Series with its “flameproof enclosure” has ATEX and IEC Ex…
Pepperl+Fuchs’ Sensor and Systems Catalog and Selection Guide now available
Pepperl+Fuchs’ comprehensive North American Sensor and Systems Catalog and Selection Guide — Edition 2.0 is now available online. The interactive elements of the online catalog make this a…
Safety Encoder-based Safe Motion Solution from Pepperl+Fuchs
Pepperl+Fuchs introduces RVS58S Safety Encoders and VBA-2E-KE4-ENC-S AS-Interface Encoder Input Modules. This safe motion solution improves machine productivity and enhances worker safety by detecting zero-speed, over-speed and motion…
Pepperl+Fuchs introduces the VisuNet XT Operator Workstation
Pepperl+Fuchs introduces the VisuNet XT Operator Workstation. This HMI solution with global certifications features a high-bright LED-backlit LCD panel display with an optically bonded, glove-friendly and sunlight-readable 15 in. (38.1 cm) or 19 in. (48.3 cm) touchscreen for clear resolution in all lighting conditions. An Intel® Core™ i7 processor supports modern software applications. The result…
Ultra-Small Photoelectric Sensors from Pepperl+Fuchs
Pepperl+Fuchs introduces R2 Series Ultra-Small Sensors – a complete family of ultra-miniature photoelectric sensors available in four sensing modes to suit varied application needs. These sensors feature a…
Join Pepperl+Fuchs at OTC 2013 for the Unveiling of Global Operator Workstations
Join Pepperl+Fuchs at OTC 2013 on Tuesday, May 7, 2013, at 1:00 p.m. Eastern time, in Houston, Texas, for a press conference hosted by Pepperl+Fuchs COO James Bolin, where Bolin will introduce the company’s new globally certified HMI solution, VisuNet XT. The press conference will be held in Room 108D on the first floor of…
Quickly Identify the Ideal HMI Solution for Your Application at Visunet.com
Pepperl+Fuchs has launched www.visunet.com – a new website dedicated to helping users select the HMI solution that satisfies specific performance needs in extreme, extended temperature, washdown and hazardous location environments. The easy-to-navigate site also showcases the company’s complete family of HMI solutions, complete with technical documents, literature, videos and other useful information. The site’s Which…
Eliminate Downtime with PS3500 Power Supply Diagnostic Module from Pepperl+Fuchs
Pepperl+Fuchs introduces the PS3500 Diagnostic Module. The PS3500-DM continuously monitors the health and efficiency of PS3500 Power Supplies and primary side power conditions. The module provides real time…
Get Two Outputs from a Single G10 AS-Interface Module from Pepperl+Fuchs
Pepperl+Fuchs introduces the VBA-2A-G10-E2L-1M-2V1-W AS-Interface Module. This single module provides two outputs, enabling it to provide one output to two devices. Each output is completely powered by the auxiliary black flat cable. This enables the G10 to deliver up to 2 A per output and up to 4 A per module. Many standard, modified, and…
Modular M-LB Series AC Surge Protectors from Pepperl+Fuchs
Pepperl+Fuchs introduces M-LB Series Surge Protection Barriers. The modular M-LB series fits various mains configurations and protects 115/230 V mains power supply lines against destructive power surges. These pluggable…
Pepperl+Fuchs KC Modules Available with Spring Terminals
Pepperl+Fuchs 12.5mm wide KC Series Signal Conditioners are now available with spring terminals to simplify and speed installation. In addition to their slim footprint, KC modules consume minimal power to reduce heat output when compared with competitive signal conditioners. Their size and energy efficiency makes them an ideal signal conditioning solution in control rooms with…
Pocket Guide to Systems & Solutions Enclosures
Pepperl+Fuchs introduces the Systems & Solutions Enclosures Pocket Guide. This guide provides a helpful overview of enclosure solutions for oil refining and purification, biodiesel production, cosmetics, chemical, petrochemical, solar grade silicone manufacturing, wastewater and power generation-related applications. Each enclosure solution also indicates relevant location classifications including Class I Div. 1, Class I Div. 2, Class…
Pepperl+Fuchs Introduces Operator Workstations 22 inch Monitors
Pepperl+Fuchs introduces a 22 in. monitor to its family of VisuNet Industrial 900 Series Operator Workstations. Also available in 15 in. or 19 in. versions, VisuNet 900 series workstations withstand high shock, vibration, washdown and other challenges in even the harshest Ex-areas, including Class I/Div 2 environments. They are encased in a rugged Type 4/4X…
Reliably detect and identify different objects
The LGS Series light grids are an example of some of the trends in safety and sensors. These devices have features typically found only on significantly more expensive sensing devices. They feature a slim IP67 enclosure housing with the control unit integrated into the receiver module, uncomplicated plug-and-play mounting plus software-free, and PC-free programming. As a…
KFU8-VCR-1 Transmitter Power Supply Signal Conditioner
The KFU8-VCR-1 transmitter power supply signal conditioners feature various inputs for standard voltage and current inputs. These 1-channel signal conditioners offer maximum installation flexibility to suit a wide range of application needs. Input and output signal ranges are selected by switches located on the front of the device. This enables fast, easy set up and setting duplication without […]
Connect More Devices in Less Space with New G11 AS-Interface Splitters from Pepperl+Fuchs
Pepperl+Fuchs introduces G11 passive splitters to its family of G11 Series AS-Interface I/O Modules. Available in flat cable or M12 male connector versions to satisfy varied application needs, these splitters are sealed to keep out contaminants. They are also ECOLAB certified and IP67 rated for reliable operation in wet environments. In addition to AS-Interface, they…
Pepperl+Fuchs Achieves UL Class I Div 2, ATEX and IEC-Ex Zone 2 Certification
Pepperl+Fuchs has received UL Class I Division 2, ATEX Zone 2 and IEC-Ex Zone 2 certification on their 15 in. and 19 in. Industrial Panel Products. This product line includes the PC8200 series Panel PCs, KM8200 Series Monitors with integral KVM, and RM8200 Series Remote Monitors. Pepperl+Fuchs offers complete stand alone Operator Workstations rated for…
Simple, Cost Efficient Power Supply Signal Conditioning from Pepperl+Fuchs
Pepperl+Fuchs introduces Transmitter Power Supply Signal Conditioners. Featuring various inputs for standard voltage and current inputs, these 1-channel signal conditioners offer maximum installation flexibility to suit a wide range of application needs. Input and output signal ranges are selected by switches located on the front of the device. This enables fast, easy set-up and setting…