The Tolomatic ACSI EtherCAT integrated servo motor and drive is a cost-effective solution for automating additional axes of motion with Industrial Ethernet protocols. As an integrated servo motor and drive, the ACSI creates a space-saving, linear actuator system, making it suitable for machine retrofits and displacing pneumatic cylinder applications. With built-in configurations for Tolomatic electric […]
Compact stepper motor with high torque from Nanotec
The new SCA5618 stepper motor from Nanotec offers 15 to 30% more torque than comparable motors with a 56-mm flange (NEMA 23). Thanks to an improved stator geometry and optimized magnetic materials, the rotor inertia is no higher than that of the predecessor model. The SCA5618 is available in three lengths and with two different […]
Rockwell expands Kinetix 5700 servo system offerings, featuring energy, downtime savings
Industrial companies can rein in energy costs and reduce downtime using two new additions to the Kinetix 5700 servo system from Rockwell Automation. The new Kinetix 5700 regenerative bus supply provides direct energy savings by regenerating excess energy and putting it back on the facility’s grid or making it available for plant-wide use. It also […]
New line of industrial gateways support EtherNet/IP to Modbus communication
Pepperl+Fuchs Comtrol announces a new product family within its DeviceMaster industrial gateway lineup. DeviceMaster EIP-MOD gateways allow communication between EtherNet/IP controllers and Modbus master controllers. The new gateways enable EtherNet/IP controllers—such as CIP complaint controllers that support Class 1 and Class 3 connections, including PLCs, HMIs, SCADA systems, and OPC servers—to connect to Modbus master […]
B&R offers servo drives with safety function Safely Limited Torque
The B&R ACOPOS P3 servo drive is now also available with safety function Safely Limited Torque (SLT). This makes B&R one of the first manufacturers to offer this certified safety function. Safely Limited Torque safely monitors torque up to SIL 2 / PL d. The torque is limited to the configured maximum value with the […]
Haydon Kerk Pittman now sells EC042B IDEA Motor
Haydon Kerk Pittman now sells the latest addition to its popular line of brushless DC motors: the EC042B IDEA Motor Series. This revolutionary new product combines exceptional performance with convenience and value. The programmable IDEA Motor integrates a precision brushless servo motor with an IDEA Drive controller in a compact package to reduce design time, […]
TRINAMIC TMC2209 stepper driver for silent desktop machines
TRINAMIC Motion Control GmbH & Co. KG now sells the TMC2209 stepper driver IC — a motor driver that enables silent operation, intelligent stall detection, and lower cost for 3D printers, office and home automation equipment, and other applications using two-phase stepper motors. The TMC2209 is pin-compatible with earlier TRINAMIC devices, as well as some […]
UAFS, ABB introduce inaugural Youth Apprenticeship Program
The University of Arkansas – Fort Smith has partnered with ABB to introduce the first Youth Apprenticeship Program for advanced manufacturing in the state of Arkansas. The collaborative program was launched at the Fort Smith Area Chamber of Commerce Signing Day on May 3 when nine students from six local high schools officially joined ABB […]
What’s there to know about terminal blocks for control applications?
What’s a component that forms the backbone of most motion or automation control systems but that often times goes unacknowledged? We’re talking, of course, about the hard-working terminal block. What exactly is a terminal block and what function does it serve in motion/automation systems? The most basic definition is that it provides an electrical connection […]
Touch Panel 600 Line brings high quality to visual applications
WAGO’s new line of Operator Interface devices, the Touch Panel 600 line, brings high-tech screens and high quality visualizations to allow users to accompany their machines with advanced features. The engine has a Cortex A9 multicore processor providing fast operating speeds. On board security include a built in firewall and VPN to help users address […]
Galil’s EDD EtherCAT slave drives now offers TwinCAT Support
The EDD-3701x EtherCAT slave drive (part of Galil’s EtherCAT Family of products) now communicates seamlessly with any TwinCAT EtherCAT master — as well as with Galil’s DMC-500×0 and DMC-52xx0 EtherCAT master drives. The EDD-3701x drives have the ability to control either brushed or brushless servo motors, steppers, and microstepping motors. The EDD-3701x is also equipped […]
AutomationDirect Productivity1000 PLC has expanded capabilities
The Productivity1000 Stackable Micro PLC provides communications, user-friendly programming, integrated data storage, and a full lineup of discrete, analog and specialty I/O modules in a super-compact size. A new CPU, more power supplies, analog I/O modules and specialty high-speed I/O and PWM modules are now available for the P1000 PLC from AutomationDirect. The P1-550 CPU, […]
Open drip proof and 4-in-1 motors from AutomationDirect
AutomationDirect has extended the line of Marathon motors to include open drip proof (ODP) and 4-in-1 series ac motors. ODP motors are available in single phase, rigid base and C-face footed (rigid base) versions with NEMA Service Factor ratings. 4-in-1 motor configurations include single-phase, totally enclosed motors; and XRI 4N1 general purpose, 3-phase, totally enclosed […]
NEMA 24 integrated motors with dual-port communications from Applied Motion
Two new NEMA 24 frame integrated motors from Applied Motion Products feature dual-port communications for connecting to the industrial EtherNet/IP network of a plant or machine. By incorporating two M12 EtherNet/IP connectors instead of just one on each axis, the SWM24IP-3DE Integrated Stepper Motor and TXM24IP-IDG StepSERVO Integrated Motor support more efficient network topologies such […]
New absolute single-turn angle sensors from Novotechnik
The new RSB 3600 Series of absolute single-turn angle sensors from Novotechnik U.S. are non-contact sensors with galvanized steel housing and stainless steel shaft. They feature up to 100 N working shaft load for HD versions and are sealed up to IP 69K, depending on the version. RSB 3600 Series sensors are EGMR (enhanced giant […]
Koford Engineering 60-A 24-V digital sensorless motor drive
Koford Engineering now sells a new series of 60-A 24-V digital sensorless drives. These drives feature 99% efficiency, compact size, and high performance. They run motors to 80,000 rpm and can run two-pole motors. The design can run at 100% duty cycle compared to many other drives that are limited to 95% duty cycle. This […]
New Marland BCMA backstop now has an automatic lubrication system
Marland Clutch now offers an automatic grease lubrication system that eliminates the need to manually grease the labyrinth seals of its Marland BCMA backstops. In many instances, Marland BCMA backstops are located in difficult-to-reach areas making regular grease maintenance very difficult. By installing the new automatic lubrication system, regular grease maintenance is performed, but no […]
Position indicators and axis-adjusting actuators from SIKO include IO-Link
Bus-capable position indicators and actuators from SIKO are suitable for an array of machine builds today. The motion sensors and adjusters make size changeover processes more efficient and reliable — which in turn supports the flexible conversion of modern production systems for ever-smaller batch sizes. It doesn’t matter if such machine conversions are done manually […]
IDEC expands IIoT offerings with a new 15-in. HMI
IDEC Corp. now sells a new HG5G-V 15-in. human-machine interface (HMI) touchscreen, the largest model in the High-Performance family. This HMI offers more display real estate so applications can readily show extensive process information with improved aesthetics and visibility. Display durability from the HMI The HG5G-V 15-in. TFT-LCD screen features a resolution of 1024 x […]
DC motors, gearmotors offered in variety of mechanical and electrical configurations
ISL Products International Ltd. offers brushed dc and brushless dc motors which can be supplied with either planetary or spur gearheads. These fully customizable dc motors and gearmotors are built to OEMs’ exact specifications to provide a turn-key component solution in diverse and demanding security-related applications. The brushless dc motors offer superior speed and exact […]
Oil-shear technology clutch/brakes from Force Control eliminate maintenance, adjustment
Force Control Industries presents their Posidyne X Class Clutch Brakes which feature Oil Shear technology that allows rapid and precise stopping, starting, reversing, speed change and positioning – all without adjustment and virtually no maintenance. Well suited for applications with frequent start/stop cycles, these unique motion control devices allow higher cycle rates (as high as […]
Embedded motion and frameless motors in collaborative robots
Collaborative robots are seeing exponential rise in use. “This trend is a perfect example of the so-called fourth industrial revolution or Industry 4.0 … a term defined by chairman of the World Economic Forum Klaus Schwab. It’s blurring lines between digital, physical, and biological spheres,” said Jonas Proeger of Trinamic Motion Control. Some of these […]
Electric motors, sensors, other motion components in off-highway and mobile robotics
Automated mobile equipment, which transports items in warehouses and freight centers as well as assembly operations, continues to boost demand for power-transmission and motion control systems. In fact, the worldwide mobile-robot market will reach nearly $15 billion by 2026, according to researchandmarkets.com. Almost all run off electric-motor drivetrains that are relatively expensive upfront but with […]
What are DIN rails for motion applications?
Let’s face it — when designing a motion control or automation system, engineers don’t immediately think of enclosures and component mounting. They’re instead concerned with selecting the right type of controllers, motors, actuators, feedback, and networking all of these pieces together. Not top of mind (usually) is how a controller will fit inside of an […]
Omron donates new design and robotics laboratory to U. of Houston engineering college
The University of Houston’s Cullen College of Engineering recently unveiled a cutting-edge laboratory donated by the Omron Foundation, the charitable arm of automation solutions provider Omron in the United States. Designed for electrical and computer engineering students, the lab includes advanced technologies and equipment donated by Omron. At the lab’s opening ceremony, UH faculty and […]