TEST & MEASUREMENT

Sager Electronics, a North American distributor of interconnect, power, and electromechanical products and custom solutions, has added Advanced Energy’s TEGAM product line to its portfolio. The TEGAM brand offers metrology and calibration technologies used in a range of measurement applications. Advanced Energy designs and manufactures precision power conversion, measurement, and control solutions for critical applications…

Spectrum Instrumentation has introduced four new Arbitrary Waveform Generators (AWGs) designed for applications in radio frequency (RF) and microwave signal generation. The AWGs offer output rates up to 10 GS/s, 16-bit vertical resolution, and bandwidths up to 3.9 GHz. These products are intended for use in areas such as wireless communications, radar development, quantum research,…

AutomationDirect has added new specialty modules for the CLICK PLC family. CLICK PLUS CPUs offer the utmost versatility with up to two option slots for custom I/O configurations. These option slots also allow for specialty modules, including the C2-DCM serial communication module and the new C2-NRED and C2-OPCUA modules. The C2-NRED module provides an industrial…

AutomationDirect has added Murrelektronik Premium EtherCAT IO-Link master modules to their IO-Link product lineup. IO-Link masters provide standardized, point-to-point connections between smart devices and controllers. IO-Link functions similarly to traditional field I/O but adds the capability to collect diagnostic and operational data from IO-Link capable devices, helping pinpoint potential problems or improvements. Typical IO-Link systems…

Festo introduces its new flagship valve terminal, the VTUX. The VTUX can serve as I/O, remote I/O, and decentralized I/O. These compact and rugged IP65/67-rated terminals can be located anywhere on a machine that boosts operational performance and original equipment manufacturer (OEM) installation productivity. VTUX modularity results in less inventory and lower overhead costs. Slated…

The ASI8100 stepper motor with built-in drive from Beckhoff adds another space-saving tool to the company’s broad range of compact drive technology products (up to 48 V DC). The ASI8100 series combines a stepper motor, stepper motor output stage, and fieldbus connection in a fully integrated design. These EtherCAT devices mount directly on the machine…

Pepperl+Fuchs introduces a new photoelectric distance sensors in the R200 series which uses Pulse Ranging Technology (PRT) for precise distance measurement up to 60 m. From material handling to the automotive industry, there are many different applications that require non-contact measurement over long distances. These tasks pose challenges if the sensor must not take up…

The EP3751-0260 EtherCAT Box from Beckhoff provides extremely accurate detection of acceleration and rotational motion. With this IP67-rated module, engineers can optimize positioning and measurement in wide-ranging applications. As a replacement for multiple previously separate devices, the machine-mountable EP3751-0260 connects an acceleration sensor with an inertial measurement unit (IMU), such as a gyroscope, in a…

AutomationDirect has added more options to the ReeR MOSAIC safety controller family. The MOSAIC-M1S-USBC has all the features of the enhanced MOSAIC-M1S master controller module, including embedded digital inputs, OSSD outputs, and expansion capabilities, but also offers a USB-C programming port. The new ReeR MOSAIC MZERO controllers are simple standalone safety controllers with plenty of…

Hexagon’s Manufacturing Intelligence division has announced a new technology to reduce quality inspection delays in large-scale manufacturing operations. Combining laser tracking with laser radar functionality, it enables manufacturers to measure detailed features and meet tight assembly tolerances from tens of meters away. Built on established measurement and positioning technology, the Leica Absolute Tracker ATS800 offers…

New from Turck, an expanded family of IO-Link products now includes an 8-port Class A IO-Link module. This new solution helps improve cost efficiency in typical IO-Link applications for complex sensor systems and terminal devices. This IP69K-rated block offers 8 IO-Link master channels and 8 configurable PNP I/O channels, or you can configure the IO-Link…

Turck is adding to its family of IO-Link single input/output (SIO) hubs with both the FIL small (8 points) and FIL large (16 points) variants. These hubs are ideal for use by machine builders and integrators in a range of industries. Reduces device requirements by allowing SIO to be integrated into an IO-Link master. Reduces…

Softing IT Networks, a maker of Ethernet cable certification testing, Ethernet speed performance testing, and Ethernet infrastructure testing, just extended its tester portfolio to include the CableMaster PoE. This dedicated power over Ethernet (PoE) cable tester extends the CableMaster product series, which includes the CableMaster 210 wiretapper. The CableMaster FO is a fiber optic power…

New from Turck, an expanded family of IO-Link products now includes an 8-port Class A IO-Link module. This new solution helps improve cost efficiency in typical IO-Link applications for complex sensor systems and terminal devices. This IP69K-rated block offers 8 IO-Link master channels and 8 configurable PNP I/O channels, or you can configure the IO-Link…

Monitor temperature and relative humidity in one device. Now users can more easily track environmental conditions over time. Tapping into the CMTH sensor’s IO-Link capability provides continuous feedback and remote monitoring options. If the temperature and humidity exceed specified limits, operators are alerted via the local switching outputs. Alternatively, cloud-based functionality can send out alerts…

Belden announced new products around data orchestration and management and data acquisition and transmission that enable better connectivity, faster speeds, and more power to help mission-critical environments perform at their peak. The data orchestration and management products include: Belden Horizon Console includes enhancements that allow organizations to take greater control of data collection and transfer.…

The IO-Link Gateway provides a wide range of valuable functions, such as advanced energy management, monitoring status information like flowing current or operating voltage, as well as remote control and parameterization of all connected LOCC-Box-Net modules. By incorporating a gateway into DC applications, each LOCC-Box-Net module can be configured and controlled individually or collectively as…

AutomationDirect has added the P1AM-200 open-source CPU to their ProductivityOpen line of controllers. This CPU can be programmed in C++ using the Arduino IDE or in CircuitPython using any text editor. CircuitPython is a derivative of the Python programming language built specifically for microcontrollers and uses a runtime interpreter instead of a compiler for more…

A new member has been added to WAGO’s Compact Controller 100 family. The 750-9401 Controller has a dual-core processor with a mix of 18 digital and analog onboard I/O channels. It also comes with a RS-485 serial port, dual Ethernet ports, a USB-C port for direct configuration connection, and CANopen communication port. The CANopen port…

Opto 22 now offers the latest firmware version 3.5 for groov RIO edge I/O. This latest release includes the CODESYS runtime engine, allowing the groov RIO to now function as a realtime controller coupled with software-configurable I/O. The new firmware for groov RIO delivers a compact, configurable, and secure PLC for end-user or OEM engineers,…

With the recent introduction of its distributed I/O solution CPX-AP-A, along with its established CPX-AP-I decentralized I/O, Festo now offers a range of electric and pneumatic automation solutions that is unmatched in North America in terms of performance, flexibility, cost savings, and engineering productivity. AP stands for Automation Platform and this backplane-based remote I/O system…

By understanding the key issues at every phase of the product lifecycle, engineers can make decisions that result in flexible, reliable, and scalable test systems. Taking a modular approach to test system development can accelerate development and mitigate risk throughout the entire product lifecycle. When designing and building automated test systems, today’s engineers find that…

Manufacturing companies and machine builder OEMs have been digitalizing their automation designs for decades. But in recent years, the iterative process of identifying and solving problems using data and technology to support the work of people has been termed digital transformation, which encompasses many aspects, from the plant floor up to the cloud. One trend…

By Alan Mathason, Emerson Manufacturing companies and machine builder OEMs have been digitalizing their automation designs for decades. But in recent years, the iterative process of identifying and solving problems using data and technology to support the work of people has been termed digital transformation, which encompasses many aspects, from the plant floor up to…

AutomationDirect has released several new modules for the Productivity family of controllers. Two new lower-cost, high-resolution, four-channel analog input modules, supporting current (0-20 mA) or voltage (0-10 VDC) signals, are now available for the Productivity1000 PLC. The ProductivityOpen Arduino-based controller line now offers a 2-port serial communications shield that provides a reliable interface between the…