Humphrey Products has introduced the latest product within the company’s ProControl family, the PCD proportional valve driver. The PCD produces the appropriate current control, either constant current or PWM, to effectively drive any ProControl proportional valve upon receiving signal from a variety of data acquisition sources (ie PLCs, IoT, closed loop sensors, etc). Suitable for product development, […]
Rugged valves
This valve family will handle the aggressive chemicals and cleaners often used in food and beverage. The iDP Valve family is a series of inert media separation valves, specifically designed for aggressive liquids and gases. The 300 and 350 Series iDP models are 2-port valves constructed of material that will handle chemicals and cleaners, and…
New line of iDP liquid valves
Humphrey Products is expanding the line of products suitable for use in the medical and analytical markets with the introduction of the iDP Valve family. Humphrey iDP are a series of inert media separation valves, specifically designed for aggressive liquids and gases. The 300 and 350 Series iDP models are efficient 2-port valves constructed of…
Humphrey acquires medical/media isolated products
Humphrey Products has recently acquired “Medical and Media Isolation Product Lines” from the Curtiss-Wright Corporation. Specifically, these products include Liquid Isolation (Inert) Valves, Liquid Isolation (Inert) Proportional Valves,…
Miniaturization makes pneumatics the choice in medical applications
From ambulance to operating room, recovery room to discharge at home, patients today encounter any number of medical devices that must be lightweight, small, safe, and often, portable….
193 balanced solenoid valve series from Humphrey
Humphrey Products announces the introduction of the 193 Balanced Solenoid Valve Series — the 19mm version of the 15mm 153 model, and our next addition to the balanced…
Proportional valve series provides frictionless operation
A new line of proportional valves is available from Humphrey Products Co., Kalamazoo, Mich. The ProControl proportional valves, like all Humphrey deigns, are two-port, normally closed, direct acting…
Introducing Humphrey Products New Proportional Valve
Introducing the PC3 Proportional Valve and the kick-off of the Humphrey brand of proportionally controlled products. ProControl Proportional Valves are uniquely designed using a frictionless flat-spring armature design that results in long, trouble-free and excellent flow characteristics. Proportional valves precisely control output flow by varying the internal orifice with the amount of input current applied…
Pilot valve series from Humphrey act as a pneumatic interface
Humphrey Products Co., Kalamazoo, Mich., introduces the A10 and A15 Series pilot valves—miniature direct-acting solenoid valves that are perfect as a high value pneumatic interface, linking PLCs and…
Latching solenoid valves for limited power applications
Humphrey Products, Kalamazoo, Mich., introduced its L310 Latching Solenoid Valve Series, which is based on its balanced-poppet, direct-acting 310 solenoid valve design. It offers low power consumption and low heat…
Advantages of Air Logic
Live webinar was recorded on November 12, 2013. Air logic has a number of significant advantages over electronics, electrical, hydraulic, and mechanical systems in the right applications. This webinar will cover some of these advantages, including a real cost savings both up front and during its use over a lifetime. We will be looking at…
The 7 biggest mistakes engineers make in designing compressed air systems
1. Choosing line sizes that are too small for the desired air flow. This includes the interconnecting piping from compressor discharge to the header and the distribution lines conveying air to production areas and within the equipment found there. Undersized piping restricts the flow and reduces the discharge pressure, thereby robbing the user of expensive […]
Penn-Air & Hydraulics are Humphrey Products’ newest distributor
Humphrey Products’ newest distributor, Penn-Air & Hydraulics Corporation, join the family of pneumatic valve distributors. The Penn-Air & Hydraulics Corporation has two conveniently located facilities, and three companies ready and willing to service all automation needs. From their York, PA office Penn-Air and Hydraulics will be representing Humphrey Products in Central, and Eastern Pennsylvania while […]
Humphrey introduces 153 Series Balanced Solenoid Valve
Humphrey Products’ (www.humphrey-products.com) 153 Series solenoid valve offers a balanced design that features an optimized solenoid and return spring force. Delivering greater flow capacity in a compact package, the multi-purpose valve can be used as normally open or normally closed valve. Whether the media is vacuum or with a full pressure range from zero to […]
Humphrey releases new 153 series balanced solenoid valve
Humphrey Products has announced the 153 Balanced Solenoid Valve, the first edition in our latest generation of direct-acting valve technology.