Using an innovative twin-head design, the Thomas Model 1420 miniature diaphragm pump achieves higher flows than conventional standard diaphragm pumps of the same physical size. The durable, oil-less Model 1420 pump is designed for applications requiring high flow in an extremely compact package, especially in the medical, automotive and business equipment markets. The pump measures…
Two New ISO Standards Now Available From NFPA
Two new ISO standards have recently been published and are now available from the National Fluid Power Association (NFPA). ISO 6358-1:2013, Pneumatic fluid power — Determination of flow-rate…
Small, Lightweight Brushless DC Pump by Thomas
The Thomas 230 Series, a brushless DC WOB-L® air compressor designed for medical and other applications requiring a compact, lightweight pump with variable output. The 230 Series pump is extremely small (3.8” high x 2.64” wide x 3.63” long) and weighs only 1.2 lbs. In addition, the 230 Series features variable output (1,000 – 3,000…
Stieber Clutch Introduces Backstops with Rotational Capability
Stieber Clutch recently launched its new RDBK load sharing, high-speed, releasable backstop at this year’s Hannover Messe. The product features a compact design with increased torque capacity compared to conventional designs, which helps avoid the over specification of gearboxes to meet large outside diameter requirements of some backstops. In the event of a blockage, belt…
IFH Group Offers Range of Custom Hydraulic Oil Reservoirs and Fuel Tanks
The IFH Group has pioneered the use of aluminized steel in hydraulic oil reservoirs and fuel tanks for off-road and specialty vehicles used in agricultural, construction, utility and a range of other rugged off-highway applications. Aluminized steel — sheet steel hot dip coated on both sides with an aluminum-silicon alloy — is designed to economically…
Water valves convert materials to provide lighter solutions
Converting a precision-machined brass casting into a molded assembly complete with threaded inserts proved challenging for Minnesota Rubber and Plastics’ design engineers. The project – a dual tank water treatment control valve that provides a continuous supply of softened water from one tank while a second tank is being regenerated. Critical to reliable water softener…
Simrit adapts to fluid market with FFKM Diaphragm Design
To improve the ability of a metering pump to resist absorption of media, Freudenberg-NOK Sealing Technologies Simrit developed a unique diaphragm design for fluid handling applications, such as inkjet printers used in offices and homes. Freudenberg-NOK’s design replaces the traditional polytetrafluoroethylene (PTFE) foil with a perfluoroelastomer (FFKM) layer that is bonded onto fluoroelastomer (FKM) pump diaphragms to…
Mitsubishi Electric Certifies Training Center at Bertelkamp Automation
Mitsubishi Electric Automation, Inc. has authorized Bertelkamp Automation, Inc., Knoxville, Tenn., as a Mitsubishi Electric Certified Training Center (CTC). The agreement with Bertelkamp makes the training center the first in the Southeastern United States to provide Mitsubishi Electric university-based training for its programmable logic controls (PLCs), human machine interfaces (HMI), variable frequency drives (VFD) and…
Bosch Rexroth opens Marine and Offshore Technology and Service Center in Houston
Bosch Rexroth marked the opening of its new Marine and Offshore Technology and Service Center in Houston with a ribbon-cutting and facility tour for customers and local officials, including Houston Mayor Pro-Tem Ed Gonzalez. The new technology and service center provides engineering services, product sales, training and system support for hydraulics and controls technologies used…
Series BST2 Transfer Arm from PHD, Inc.
PHD, Inc. introduces the new Series BST2 Transfer Arm. Specifically designed to fit most Sidel Series2 machines, the BST2 Transfer Arm provides significantly longer service life and increased precision over OEM arms, while reducing maintenance and downtime in stretch blow mold applications. BST2 Transfer Arm Benefits: • Vertical height adjustment eliminates shim packs to increase…
OEM Liquid Pumps, High Pressure Transfer Capabilities with Micro Footprint
KNF Neuberger OEM self-priming micro-diaphragm liquid transfer pumps offer design engineers a unique combination of performance and application flexibility in a remarkably small package (as small as 1.5 in length.) Rated to operate continuously against pressures as high as 87 PSIG (some models to 145 PSIG) with 8.86 in. Hg suction capacity, these small but…
Ferrules simplify hydraulic hose coupling connections
Gates Corp. has launched a new line of six ferrules to complement its GlobalSpiral couplings for use on its wire-braid hydraulic hoses. Using these new components can simplify…
AMETEK’S Prestolite Motors Releases 2013 Motor Catalog
Prestolite Motors has announced the release of a new 32-page motor catalog that provides detailed information on its extensive line of high-quality motors used in hydraulic power packs,…
Alliance Sensors announces the MR Series of Linear Position Sensors
Alliance Sensors Group announces the MR Series of Linear Position Sensors for use in measuring the ram position of hydraulic and pneumatic cylinders. The MR Series is designed…
SSP Introduces 83 and H83 Series High Pressure Ball Valves
SSP introduces the 83 Series family of high pressure ball valves, including the H83 configuration for high pressure/severe service, diving, research & development and offshore control panel applications. The 83 (2 way) and 83X (3 way) ball valves have a maximum allowable working pressure up to 6,000 psi (415 bar), and the H83/H83X ball valves…
Hydraulics aids in keeping offshore platforms stable
Barge Master BV, a Dutch company, has installed Rexroth motion compensation to neutralize waves and enhance the usefulness and safety of offshore cranes. Barge Master launched the BM-001,…
Famic Technologies Presents Automation Studio at the OTC 2013
Famic Technologies Inc. is presenting its latest all-in-one design and simulation software solution, Automation Studio, at the Offshore Technology Conference (OTC) from May 6 to 9 in Houston, Texas. Live and interactive…
NFPA Releases Updated Pre-Competitive Research Agenda
In August 2009, the National Fluid Power Association (NFPA) published the Technology Roadmap for the Fluid Power Industry. The purpose of the Roadmap was to provide NFPA member…
Saint-Gobain launched Composite Bearings Solutions for Hydraulic Pumps
Building on its success in the construction and industrial pumps market in the US, Saint-Gobain Performance Plastics has launched its innovative NORGLIDE composite bearings solutions for hydraulic pump technology in heavy-duty vehicles throughout Europe and Asia. The company has been developing low-friction, wear-resistant NORGLIDE composite bearings to help manufacturers in the US minimise maintenance requirements…
5 interesting hydraulic cylinder videos
Here are the five of the most interesting hydraulic cylinder videos that we’ve found online, along with short descriptions of each one. What other videos to you recommend?…
World Wide Metric releases CAST Hydraulic Fittings Catalog
World Wide Metric’s CAST S.p.A. fittings catalog now showcases an increased PN at 800 bar for DIN fittings with improved corrosion resistance. In addition, the catalog now has more compact banjos, hose…
Molex Builds Up Portfolio of Brad mPm Valve Connectors
Molex has released several new versions of its Brad mPm external thread, field attachable DIN valve connectors for hydraulic, pneumatic and electromagnetic devices. Now available in DIN Form B, C and Micro versions with electronic circuitry, the Brad mPm valve connectors feature standard circuitry options, including LED and bi-polar LED indicators, blocking diodes and voltage-dependent resistors (VDRs) to protect against…
Sauer-Danfoss Unveils PLUS+1 GUIDE 6.1, Work Function Control Library
Sauer-Danfoss introduced the new version 6.1 of PLUS+1 GUIDE, their industry-proven graphical programming environment, at bauma 2013 in Munich. Version 6.1 of GUIDE (Graphical User Integrated Development Environment)…
Bosch Rexroth highlights drive system components at WINDPOWER 2013
Bosch Rexroth will showcase its innovative drive system components and technologies for the wind industry in booth #2018 during WINDPOWER 2013 at McCormick Place in Chicago, May 5-8,…
Comatrol Expands Portfolio with HSV Solenoid Valves and Flow Control at BAUMA 2013
Comatrol introduces the HSV high-pressure solenoid valve platform and HFCV10-RT high-pressure flow control. These developments are a continuation of Comatrol’s “Rhythm of Innovation,” with its strong focus on…