The PMSM (permanent magnet synchronous motors) fulfills the requirements of the pending IE4 (Super Premium Efficiency) classification. An environmentally friendly range of motors, it uses an efficient rotor design that integrates embedded permanent magnets made from the rare-earth material. Its design reduces heat losses from the rotor by 100%, total losses by approximately 25%, and…
Seals for natural gas applications
Range of UL listed sealing compounds suit natural gas applications. These seals have low extraction characteristics, low compression set, and low temperature capabilities. The rubber compounds designed specifically for natural gas and liquid propylene applications range from NBR, HNBR and Fluorocarbons, with temperatures ranging from -60°C to 105°C, with multiple additional end uses. Apple Rubber…
Brushless flat motor with MILE encoder
The slim design of the EC 90 flat motor is now equipped with a MILE encoder. According to the manufacturer, MILE (Maxon’s Inductive Little Encoder) is the world’s smallest inductive rotary encoder. Its operating principle is based on the detection of high-frequency inductivity, which generates eddy current in an electrically conducting target. The advantage of…
Optically clear adhesives
Loctite® Liquid Optically Clear Adhesives (LOCA) improve the viewing experience, increase display durability, extend product life, reduce power consumption and enable thinner device designs. New dual cure technologies allow full cure in shadowed areas, and offer reduced shrinkage to control display distortion and eliminate mura. When used on AR glass, these products increase the contrast…
KMA36 universal magnetic encoder
The KMA36 universal magnetic encoder from Measurement Specialties, Inc. seamlessly combines a magnetoresistive sensor array with an analog-to-digital converter and signal processing in a compact TSSOP package. Using an Anisotropic Magneto Resistive (AMR) technology, the contactless sensor measures the incremental positions along a 5 mm linear magnetic pole strip and magnetic field angle of an external […]
Clippard’s new stepper-controlled proportional valve for critical applications
Clippard Instrument Laboratories’s high-flow stepper-controlled proportional valve uses the most robust linear actuator with acme lead screw, making it a clear standout in terms of performance and durability. The proportional valve is ideal for critical applications such as analytical, medical and industrial automation as well as gas delivery. It also has potential application for anesthesia […]
Kollmorgen’s Automation and Motion Solutions Catalog available
Kollmorgen has available its Automation and Motion Solutions Catalog. This comprehensive resource guide details the features, benefits and specifications of the company’s broad range of innovative motion control solutions headlined by Kollmorgen Automation Suite™, an integrated system that includes the development environment, engineering services and best-in-class automation and motion components to help OEMs create a […]
Kaydon’s Reali-Slim Bearings on a mission to Mars
The one-ton Curiosity rover that landed on Mars on August 6 is equipped with five pairs of Reali-Slim thin section bearings from Kaydon Bearings (www.kaydonbearings.com). The duplexed bearings help the rover save weight and space in two areas — supporting the steering actuators in its wheels and preparing rock samples for analysis. Designed, developed and […]
Festo introduces hygienically-safe pneumatic drives
Festo (www.festo.com) has unveiled three corrosion-resistant and hygienically-safe pneumatic drives that cater to a variety of applications aside from food handling — the DGRF, CRDSNU and the DSBF drives. The guided drive DGRF can handle workpieces under severe environmental conditions, while the round cylinder CRDSNU and the standard cylinder DSBF are fitted with self-adjusting cushioning […]
AUMA’s new part-turn actuators to replace the SG.1 range
AUMA (www.auma.com) has unveiled its latest range of SQ.2 part-turn actuator for the automation of ball valves and butterfly valves at the ACHEMA Exhibition in Frankfurt. To be released on 2013, the all-new actuators will replace the SG.1 range, which has been produced by the company since 1998. The company is set to expand the […]
PCI/104-Express Boards available for CAN and LIN interfaces
IXXAT (www.ixxat.com) has added two new variants to its PCI-Express portfolio. Based on the PCI/104-Express standards, the PCI/104-Express boards are offered with up to four CAN interfaces and an optional switchable high- or low-speed CAN and LIN interfaces, depending on the version. The new PCI/104-Express boards were specifically designed for compact industrial computers as well […]
SKF CASM Series Servo Actuators with 100% duty cycle
SKF (www.skfusa.com) has unveiled its latest series of servo actuators that deliver up to 100 percent duty cycle while allowing continuous operation. The all-new SKF CASM Series servo actuators serve as the perfect electromechanical solution for applications that were previously performed by traditional pneumatic cylinders. Aside from reducing energy consumption, their technology can also effectively […]
Wineman Technology launches upgrades for RAPID
Wineman Technology Inc (www.winemantech.com) recently unveiled the upgrades to RAPID — an integrated, data acquisition and multi-loop control system suited for test cell applications requiring fast development and low-cost deployment. The 3U, 19-inch and rack-mount controller supplies real-time data acquisition and control for servo-hydraulics test cell applications and dynamometers. It is also ideal for data […]
TURCK rotary single axis inclinometer offers extended application flexibility
TURCK (www.turck.com) has expanded its portfolio of dual axis CANopen inclinometers for angular tilt detection with the addition of the latest rotary single axis inclinometer. Featuring up to 360 degrees of monitoring range, the single axis inclinometer’s extended application flexibility enables operators to conveniently monitor mechanical arms, including tensioners or moving components. CANopen communication makes […]
Hilscher netJACK interface module offers flexible networking
Hilscher (www.hilscher.com) has introduced a new range of network interfaces modules that allow users to easily and quickly change or add fieldbus as well as Industrial Ethernet protocols in automation devices. The netJACK module supports thirteen different protocols and fieldbuses, such as PROFIBUS and DeviceNet, including Industrial Ethernet protocols like Ethernet/IP, PROFINET and EtherCAT, in […]
Beckhoff EtherCAT Box stainless steel I/O modules suit hygienic design applications
Beckhoff Automation (www.beckhoff.com) has added the EQ series EtherCAT Box I/O modules in V2A stainless steel housings to its range of I/O systems for “hygienic design” applications. The new Beckhoff EtherCAT Box series of stainless steel I/O modules is especially designed for direct use on machines which require high hygienic standards such as the chemical, […]
Baumer MA20 measuring wheel encoder delivers precise measuring results
Baumer (www.baumer.com), offers flexible, simple and reliable speed and position feedback for conveyor system with its all-new MA20 measuring wheel encoder. Offering resolutions as high as 25,000 ppr, the two-in-one device seamlessly combines a highly precise measuring wheel and a high-resolution optical incremental encoder. Even at relatively low conveyor speeds, the encoder is still capable […]
igus igubal polymer plastic bearings can now be detected
igus has extended its igubal portfolio to include a polymer material that can easily be recognized by electric metal detector, effectively protecting food from metal-particle contamination. The igubal range, which features spherical balls and housing made from detectable plastic, includes flanged units, lubrication and maintenance-free clevis joints and rod end bearings, pedestal bearings and press […]
SMC unveils compact vacuum ejectors
SMC’s (www.smcusa.com) vacuum ejectors — the NZX, NZM and the ZA series — feature a compact design that allows them to be customized to integrate vacuum sensor switches, suction filters, and supply/release valves into the generator. A single-stage vacuum generator, the NZX series features a modular design that enables users to select only the components […]
Piab unveils XLF line of suction cups
Piab (www.piab.com) has launched a new line-up of extra-large flat (XLF) suction cups that can handle various product sheets securely and safely in manufacturing environments. The extra-large flat suction cups come in various diameter sizes namely 150 mm, 200 mm, 250 mm and 300 mm. All sizes are similarly designed, and sport an aluminum plate […]
Parker OSPP-BG pneumatic linear drive
Parker’s (www.parker.com) OSPP-BG Pneumatic Linear Drives feature a plain bearing guide that is directly integrated into the cylinder barrel. Eliminating the need for piston rod, the pneumatic linear drives offer long service life, smooth operation and high service intervals. Longitudinal slot within the cylinder is protected and sealed by stainless steel bands while the piston […]
Exair’s Cold Gun Aircoolant System now CE compliant
Compressed air-operated products manufacturer Exair (www.exair.com) has optimized its latest Cold Gun Aircoolant System to meet the health, environmental and safety standards of the European Union to obtain the CE mark. An affordable alternative to costly mist systems, Exair’s Cold Gun reduces heat buildup on machining operations by producing a quiet and cold stream of air. […]
Clippard EVPD proportional valve driver offers plug-and-play control
Pneumatic valve manufacturer Clippard Instrument Laboratory, Inc. (www.clippard.com) has unveiled the EVPD Proportional Valve Driver, which is specifically developed as a plug-and-play interface between its EVP Series Proportional Control Valves and PLCs as well as other controls. Ideally suited for laboratories and OEM product development, the EVPD series can also be customized to suit OEM […]
Bimba unveils new “Blue and Improved” Original Line Cylinders
Bimba Manufacturing Company (www.bimba.com), maker of hydraulic, pneumatic and electronic solutions, has proudly announced the release of its newly redesigned “Blue and Improved” Original Line cylinder. The industry-leading non-repairable Original Line product series features various product enhancements that include permanent grease lubrication and extended catalog life rating that ranges from 1,400 miles to 3,000+ miles. […]
Parker introduces the modular P1Q Series Global Compact Cylinders
Parker (www.parker.com) has unveiled an economical, space-saving cylinder that is ideally suited for various applications — the P1Q Series Global Compact Cylinders. Available in 10 bore sizes, the P1Q series offers modular flexibility as well as low cost price point. Standard stroke ranges between 5 mm and 100 mm while pressure range is up to […]