Connector Tips

Amphenol Industrial Operations now offers the TS1 Series, a high-performance industrial power connector developed to meet the growing demand for electrification, which requires robust, reliable power connectors capable of performing under harsh environmental conditions. The new series is ideal for high-power electrified and hybrid applications with high thermal, mechanical, and electrical stresses, such as electric […]

Hirose has launched a 1.0 mm coaxial connector that complies with the IEEE Std 287 and supports frequencies up to 110 GHz. Featuring a compression-mount center contact, the 1.0mm Series coaxial connector supports varying PCB thicknesses from under 1 mm to several mm — providing greater design flexibility. Eliminating the need for soldering, the 1.0mm […]

The New Miniature SMT Test Point from Keystone Electronics Corp. features a symmetrical flat-wire design that supports reliable electrical contact while maintaining a minimal PCB footprint. Manufactured from silver-plated phosphor bronze, it is compatible with lead-free and traditional reflow soldering and supports vacuum or mechanical pick-and-place assembly for high-density PCB testing applications.

It’s easy to overlook vendor-specified mating cycle numbers for connectors and thus encounter problems over time. No, this title isn’t some kind of joke about how your connectors, if left alone at night, will magically spawn new mini-versions of themselves or miraculously grow new contact positions. Instead, it’s a serious issue that is easily overlooked […]

When it comes to reliable and efficient data storage, the physical interface matters as much as the memory card itself. Designers at all levels need to understand how various card types — from the ubiquitous SD to embedded SIMs and smart cards — actually connect to and communicate with devices. The Same Sky blog post, […]

Molex has introduced its MX-DaSH Modular Wire-to-Wire Connectors, which use interchangeable cartridges within a single housing to combine power, signal, and high-speed data in automotive harness applications. The unsealed, cartridge-based platform supports up to 70 circuits and multiple terminal sizes, enabling adaptable configurations for zonal vehicle architectures. Designed for automated assembly and aligned with USCAR2 and USCAR49 […]

Amphenol RF announces the introduction of a line of PFAS-free SMA connectors and adapters, expanding our industry-leading portfolio of high-performance RF interconnect solutions. These products are engineered from PEEK (polyether ether ketone) as a PFAS-free alternative to PTFE, offering an environmentally responsible solution without compromising performance. This innovative product line provides drop-in replacements for a […]

Mill-Max has expanded its pin-header product line to include pins with 3 mm stroke, making them suitable for board-to-board connections with large tolerance stack-ups. Single and double row spring-loaded pins with 2.54 mm (0.1 in.) keep contact in high shock and vibration environments. Specifications include: Max stroke capability:  3 mm (0.118 in.); Rated travel (mid-stroke): . 1.5 […]

Weidmuller USA has launched a web-based Online Weidmuller Configurator (WMC) for designing DIN-rail terminal strip layouts in a browser. The tool is designed to support a cloud-based workflow from layout creation through review and production, allowing designs to be shared by link for collaboration and revision without local software installation. The Online WMC includes an […]

Infineon Technologies and 3M have announced a 5 m passive metal industrial camera cable assembly for USB3 Vision machine-vision cameras. The 3M Industrial Camera Cable Assembly 1U30P-TC series is specified to support data rates up to 10 Gbps over the full 5 m length, targeting factory-floor deployments where camera placement flexibility and deterministic image transfer […]

binder’s Harsh Environment Connector (HEC), part of the 696 series, is designed for outdoor applications that require protection against dust, moisture, and mechanical impact. Its housing uses corrosion-resistant and UV-stable materials, and its sealing system is engineered to maintain electrical performance during exposure to precipitation, wash-downs, and temperature variation. These characteristics support use in agricultural […]

TE Connectivity has introduced its latest Single Pair Ethernet (SPE) M12 hybrid connectors, developed to integrate power-delivery and high-speed data transmission within a single interface for industrial automation systems. Designed to the IEC 63171-7 standard, the connectors support both communication and power distribution to field devices, enabling real-time data exchange across factory networks. The SPE […]

Sumida America has introduced the PANTA® Shielded ZIF Jumper product line, a family of flexible flat cables designed for compact electronic systems that require stable high-speed signaling and strong electromagnetic performance. The series includes both shielded and unshielded versions to support a range of signal-integrity and electromagnetic-compatibility requirements. The shielded version uses a controlled-impedance 100-ohm […]

Keystone Electronics has introduced a SEMS screw option for its PCB screw terminals, intended to simplify wire attachment and improve mechanical stability in board-level applications. The addition of a preassembled SEMS screw allows users to secure wire leads, including bare wires, without the twisting that can occur during tightening. The terminals are rated for 15- […]

Samtec, Inc. announces production quantity availability of its new line of rugged, multi-port SMPM solutions that feature threaded coupling for high thermal shock and vibration environments commonly found in military, aerospace, and communication applications. Samtec’s rugged, threaded-SMPM solutions provide high-frequency performance up to 65 GHz with excellent reliability in high-density applications. SMPM multi-port mated sets […]

LEMO has introduced the REDEL SP IP68 Series, a new family of compact circular connectors designed for medical equipment, test and measurement devices, and unmanned aerial systems. The series provides IP68-rated sealing without the use of resin or potting compounds, aiming to simplify assembly while maintaining environmental protection and mechanical durability. The connectors use a […]

LEMO has introduced the REDEL SP IP68 Series, a new family of compact circular connectors designed for medical equipment, test and measurement devices, and unmanned aerial systems. The series provides IP68-rated sealing without the use of resin or potting compounds, aiming to simplify assembly while maintaining environmental protection and mechanical durability. The connectors use a […]

Amphenol RF is pleased to introduce additional configurations in the SMA locking cable assemblies series. These pre-configured assemblies are designed on flexible micro-coax cable types and feature the I-PEX MHF I Locking interface on the opposite end. These waterproof IP67-rated SMA assemblies provide a secure connection in environments where vibration-resistant RF interconnects are required, such […]

Amphenol RF has expanded its line of automotive and industrial interconnects with the addition of IP67-rated FAKRA straight crimp rear-mount bulkhead plugs. These connectors are compatible with RG-58 and LMR-195 cable types and support reliable RF performance in demanding environments. The rear-mount bulkhead design allows the connector to pass through a panel or enclosure wall, […]

Mill-Max Manufacturing Corp. announced the introduction of new .100” (2.54 mm) pitch magnetic spring-loaded connectors. This expansion of the Maxnetic product line delivers next-generation high-reliability magnetic connectors designed for use in ever-shrinking electronic devices and their applications. Like all Mill-Max connectors, this addition to the Maxnetic connector lineup is engineered for demanding applications across medical, […]

Molex announced the availability of the Molex Quad-Row Shield Connector, featuring the industry’s first space-saving, four-row signal pin layout with a metal electromagnetic interference (EMI) shield. Quad-Row Shield Connector achieves up to 25dB reduction in EMI compared to non-shielded Quad-Row, and is ideally suited for space-constrained applications, such as smart watches and other wearables, mobile devices, […]

W. L. Gore & Associates has introduced a new line of High Speed Data Cables for Ultralight Solutions, designed to reduce cable weight while maintaining signal integrity and mechanical durability. The new cables are up to 50% lighter than many comparable high-speed data cables currently in use. Compared with Gore’s existing high-speed cable range, the […]

Same Sky’s Interconnect Group has expanded its pogo pin product line to include high current models rated from 7 A to 25 A. These pogo pins feature gold-plated contacts to support reliable electrical performance and are rated for up to 100,000 mating cycles. The new CPG series pogo pins are available in both surface-mount and […]

Amphenol RF has introduced SMA locking cable assemblies designed to provide reliable high-frequency connections in compact systems. The assemblies feature one end with a locking MHF 4 LK connector and are available in both SMA and reverse-polarity SMA versions. The assemblies use 1.37 mm micro-coaxial cable, which combines flexibility with the ability to transmit signals […]

Hirose has expanded its DF22 Series of high-current power connectors with a new branch adapter, DF22B, designed to simplify wiring and reduce cabling and installation time. Compared to traditional wiring methods, branch wiring reduces the number of cabling leads, offering significant space savings. The DF22 Series power connector utilizes a four-point contact design and highly […]