AutomationDirect now offers Fibox MNX and TEMPO series polycarbonate miniature cases which are engineered to deliver durable, adaptable protection for every installation need. The MNX series combines a premium thick-wall construction with reinforced corners for superior impact resistance and long-term performance. A corrosion-free polyamide screw cover ensures a secure seal, while metric knockouts sized from M12…
OKW expands enclosure and knob range for HVAC and climate control
OKW has extended its range of electronic enclosures and tuning knobs for HVAC, climate control and environmental technology. The enclosure manufacturer offers IP-rated housings for applications including wind turbine control, air quality metering, Geiger counters, agricultural climate control, inspection cameras and leak detection. HVAC, climate control, and environmental electronics are exposed to hazards such as…
Altech expands DIN enclosure range for electronic packaging
Altech Corporation has expanded its range of DIN Rail Mounted Electronic Enclosures, offering a broad selection for housing electrical, electronic, and electromechanical devices. Altech DIN enclosures are suitable for housing devices such as relays, sensing and monitoring equipment, timers, transducers, and printed circuit boards. Units incorporate flame-retardant and maintenance-free materials to ensure the longevity and…
EXAIR releases low-cost Cabinet Cooler for electronics
EXAIR has introduced a cabinet cooling solution designed to help reduce electronic control system downtime caused by heat, dust, and moisture. The Cabinet Cooler uses a vortex tube to generate cold air from compressed air and has no moving parts. This compact unit can be installed quickly through a standard electrical knockout or drilled hole.…
AutomationDirect adds pre-cut Deburred steel DIN rails
AutomationDirect has introduced pre-cut DINnector steel DIN rail in lengths from 50mm to 600mm. These rails reduce the need for manual cutting and drilling and are deburred to improve safety and help prevent damage to cables and wires during installation. Steel DIN rail offers strength and durability for applications requiring load-bearing support and performs reliably…
EXAIR introduces UL-classified cabinet coolers for HazLoc use
EXAIR’s Hazardous Location Cabinet Cooler Systems are UL classified for use in purged and pressurized electrical enclosures in Class I Div 1 (Groups A, B, C, D), Class II Div 1 (Groups E, F, G), and Class III environments. Tested by UL, the systems meet the requirements for hazardous locations. With cooling capacities up to…
New aluminum ATEX Cabinet Coolers protect electronics in hazards
EXAIR’s ATEX Cabinet Cooler systems provide a cost-effective option for cooling electrical enclosures in ATEX-classified hazardous areas. Now available in aluminum construction, these systems are designed for use in Zones 2 and 22, are UL tested, CE compliant, and meet ATEX standards for purged and pressurized enclosures. With cooling capacities up to 5,600 Btu/Hr., ATEX…
Optimizing enclosures for extreme operating environments
Every industrial market segment employs enclosures, extending from power and energy, oil and gas, and water and wastewater to manufacturing, communications, and transportation. Enclosures’ primary role is to protect vital components and devices from external environmental hazards and, in turn, protect imperative — and often expensive — connected equipment, such as automated manufacturing, robotic, pumping,…
AutomationDirect offers pre-cut, deburred aluminum DIN rails
AutomationDirect has added pre-cut aluminum DIN rail, available in sizes from 72mm to 858mm, which helps eliminate the risk to personnel and saves time spent on cutting and drilling products with sharp edges and blades. Pre-cut DIN rails are also deburred for safety and to prevent cables and wires from being damaged during installation. Aluminum…
AutomationDirect adds AttaBox hinged screw cover enclosures
AutomationDirect has added AttaBox Heartland/Heartland SL series hinged screw cover enclosures that provide an alternative to conventional latch enclosures. The hinged screw cover configuration gives the enclosure the highest level of protection against water intrusion (NEMA 6P), and the polycarbonate resin in the Heartland series has attained the best available “F1” rating, having passed critical…
OKW’s new RAILTEC panel enclosures for individual DIN rail devices
OKW has extended its RAILTEC B range of DIN rail enclosures by adding a new panel version with pluggable front and side panels. The RAILTEC BP M22 can hold plug headers (up to 1 or 2 x 16-pin, 5.08, fixed or pluggable). It is suitable for various applications, including DIN-rail-mounted measuring and control devices. These…
METCASE launches TECHNOMET TX for desktop instrumentation
METCASE has launched TECHNOMET TX, a new range of tower enclosures for tabletop electronic instrumentation. Designed to conserve workstation space, these new aluminum enclosures are suitable for applications in test and measurement, industrial control, medical and wellness devices, peripheral equipment, communications, and laboratory use. Like other models in METCASE’s TECHNOMET range, the new TX features…
ROLEC offers three modular suspension arms for industrial electronics
ROLEC’s suspension arms range now includes three models: profiPLUS 70 for payloads up to 120 kg, profiPLUS 50 for up to 80 kg, and taraSMART for just over 40 kg. The three modular suspension arm systems, all rated IP 54, support industrial electronics applications including HMI, process automation, machine control, IoT/IIoT and Industry 4.0/smart factory…
TECHNOMET-CONTROL enclosures now available with pole mount
METCASE’s TECHNOMET-CONTROL enclosures are now available with a mounting bracket for poles and masts ⌀1.97” mm or larger. Applications include HMI, panel PCs, industrial control, factory processing, security systems, test and measurement, point-of-sale terminals, IIoT and detection equipment. The new pole mounting bracket fits the standard VESA mounting holes on the rear panel of all…
Enclosure air conditioners available for harsh and corrosive environments
Seifert Systems, Inc. introduces the SoliTherm Protec Series of enclosure air conditioners for use in environments with salt water, wastewater, chlorinated water, and petrochemicals. Protec air conditioners feature AISI 316 (V4A) stainless steel housing, anti-rust coatings on the condenser, a controller and ambient side tubing protected from exposure, resistance to chemicals and salt spray, and an integrated heater…
ROLEC’s technoBOX (IP 66) plastic enclosures now available with more accessories
ROLEC’s technoBOX plastic enclosures can now be specified with accessories including front plates, hinges, case feet, mounting plates, supporting rails, cable glands, and external mounting brackets (that can be rotated by 90°). Smart, robust technoBOX (IP 66) is ROLEC’s most cost-effective plastic enclosure. It is ideal for a wide range of industrial electronics applications, offering…
OKW updates NET-BOX for wall-mounted IoT/IIoT electronics
Growth in Industry 4.0, Smart Factory, IoT/IIoT and automation is driving demand for OKW’s updated NET-BOX wall-mount enclosures. Slim, stylish NET-BOX is now available with IP 65 protection. It is ideal for building management, central control systems, data acquisition, data systems engineering, gateways, measurement, supervision terminals and medical/wellness devices. NET-BOX’s simple three-part assembly comprizes a…
Norstat unveils MBI-L series larger sized polycarbonate enclosures
Norstat has introduced the MBI-L series, a line of larger sized polycarbonate enclosures that are ideal for demanding industrial environments where additional space is needed. The MBI-L series from Multi-Box are larger sized polycarbonate enclosures designed for demanding industrial environments and for applications where a larger size is needed. The enclosure bases come with either…
AutomationDirect offers Teknokol Eco series HMI enclosures and suspension arm systems
AutomationDirect has added Teknokol Eco series HMI enclosures and suspension arm systems which are designed to work together to provide customized, adjustable HMI panels using a selection of components and cut-to-length arm profiles. These suspension systems allow the HMI to be relocated as needed for better HMI visibility and operator comfort. The medium-duty TK060 series…
OKW offers TOPTEC universal enclosures for PCBs with protruding connectors
OKW reports strong interest in its TOPTEC universal plastic enclosures following the electronica 2024 trade fair in Munich. TOPTEC allows PCBs with protruding connectors and interfaces to be mounted directly into the case. Applications include monitoring, signalling equipment, control systems, medical/wellness devices, computer peripherals, IoT and IIoT. These versatile ABS (UL 94 HB) enclosures are…
TECHNOMET instrument enclosures now offer more handle options
METCASE’s premium TECHNOMET desktop instrument enclosures can now be specified without a handle, or with recessed side handles or a tilt/swivel bail arm. The choice of handle options makes these elegant aluminum enclosures readily portable. Applications include medical/wellness, test and measurement equipment, industrial control, peripheral devices and interfaces, switchboxes, communications and laboratory equipment. TECHNOMET has…
COMTEC sloping-front plastic enclosures increasingly specified for electronic devices with touch screens or displays
OKW’s COMTEC sloping-front plastic enclosures are increasingly being specified for electronic devices with touch screens or displays. The versatile enclosures suit various applications, including data collection terminals, communications devices, access control/security, medical/wellness, laboratories, point-of-sale, measurement, control, and industrial regulation. These modern desktop/wall-mount enclosures feature rounded contours and a recessed top inclined 10° for comfortable viewing…
OKW’s IK/IP-rated SOLID-BOX safeguards industrial touch screen and display electronics
More electronics designers are specifying OKW’s tough SOLID-BOX to safeguard sensitive touch screens, control panels, and displays in harsh industrial environments. IK 08 (impact) and IP 66/IP 67 (ingress) protection make SOLID-BOX suitable for plant and machine construction, HVAC, IoT/IIoT, Smart Factory/Industry 4.0, gateways, data loggers, ICT, electrical installations, measurement/control, agriculture/farming, sensor systems and safety…
Smart new colors for METCASE’s TECHNOMET premium instrument enclosures
METCASE’s premium TECHNOMET instrument enclosures are now available in an additional new standard color scheme. These elegant desktop and portable enclosures are ideal for medical and wellness electronics, test and measurement, industrial control, peripheral devices and interfaces, switchboxes, communications, and laboratory equipment. The new color choice is traffic white (RAL 9016) for the main case…
OKW’s DATEC-TERMINAL plastic enclosures now in two versions
OKW’s popular DATEC-TERMINAL plastic enclosures are now available with or without a separate terminal section. Tough, stylish DATEC-TERMINAL is ideal for data collection, security and access control, measurement and control, HVAC, medical/wellness, and point-of-sale devices. A wide choice of lids and covers (accessories) adds IP 54 ingress protection and makes these ergonomic desktop and wall-mount…