I/O modules

Advantech, a global leader in IoT technology, launces a next generation OPC UA I/O sensing module with Modbus protocol. ADAM-6300 is an IT/OT convergence series that integrates information technology (IT) systems with operational technology (OT) – representing a leap forward in smart IoT technology for factories and utilities. Moreover, through the OPC UA and built-in…

Acromag’s BusWorks NT series remote I/O modules provide an Ethernet interface for analog, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a webserver with Modbus TCP/IP communication to monitor or control the internal I/O channels. An integrated DIN rail bus allows connection of up to three NTX expansion I/O modules.…

WAGO introduces two solid state MOSFET digital output modules that have the ability to switch 2 Amp resistive loads at a frequency up to 1 Hz. With this capability, it can switch high current outputs without concern of wearing out mechanical relay contacts. The 750-527 and 750-528 are both a 4-channel semiconductor I/O modules that…

Abaco Systems, Inc. announced the release of two boards, the SBC314C single-board computer and RAR15XC avionics data bus communications XMC mezzanine board, for embedded flight-certifiable applications. Previously only available as part of the FORCE2C rugged line replaceable unit (LRU), the two are now each available as separate boards. The SBC314C 3U VPX single board computer,…

Two new series of I/O modules have been made available for Control Techniques’ drives, designed to provide drive-based machine control solutions without the need for a PLC or SCADA system. Machine control applications often involve a PLC, using I/O to communicate with sensors attached to the machines involved. For Control Techniques drives, communications protocols are…

Parker Hannifin, the global leader in motion and control technologies, as part of its global focus on factory automation, today announced the release of a revolutionary network portal, The PCH Network Portal. The PCH Network Portal provides the opportunity to minimize machine costs, shorten start-up time and offers built in features to help reduce end…

When OEMs can standardize their designs with one family of I/O products, it simplifies their efforts and gives them the flexibility to adapt controller platforms as needed. By Matt Hou, Electrical Engineer, Dinkle International Original equipment manufacturers (OEMs) of machinery and process systems come in all shapes and sizes, serving a variety of industries, but…

WAGO’s 750 series (750-498) 8-channel thermocouple analog input module is compact, easy to wire, configurable, and is 12 mm wide, saving space in control cabinets and reducing installation and commissioning time. The 750-498 can be configured by channel for thermocouple types B, C, E, J, K, N, R, T, and S using WAGO-I/O-CHECK software or…

The kits, available in three different sets — measurement, sensing, and traceability — are designed to introduce key components so that customers new to Balluff IO-Link can evaluate the suitability of IO-Link for their specific applications and see the Balluff difference. All three kits include Balluff’s IO-Link Master and I/O hub, Balluff inductive and capacitive…

IDEC Corporation announces an update to add EtherNet/IP communications to the MicroSmart FC6A Plus PLC. This update provides more options for end-users, designers, and OEMs to integrate the FC6A Plus with many types of I/O systems and intelligent automation devices. Expanded Connectivity Options The FC6A Plus is already expandable to support up to 2,060 I/O,…

WAGO’s new 750-564 analog output module can be configured to feature either voltage or current outputs. These 4-channel modules offer individual configuration, making it ideal for applications that require multiple signal types. Each channel also provides diagnostics that include wire break, short circuit, and field power supply information. With under 3 ms of conversion time,…

WAGO’s new 750-564 analog output module can be configured to feature either voltage or current outputs. These 4-channel modules offer individual configuration, making it ideal for applications that require multiple signal types. Each channel also provides diagnostics that include wire break, short circuit and field power supply information. With under 3 ms of conversion time,…

WAGO introduces their new I/O System Field designed to meet the requirements of modern decentralized production facilities providing maximum performance and high-level connectivity.  This system is IP67 rated and offers flexibility with two types of housings: Cast zinc housings with encapsulated electronics for harsh environments Non-encapsulated plastic housings with low mass for mobile applications such…

WAGO introduces its I/O System Field designed to meet the requirements of modern decentralized production facilities providing maximum performance and high level connectivity. This system is IP67 rated and offers superior flexibility with two types of housings: • Cast zinc housings with encapsulated electronics for harsh environments • Non-encapsulated plastic housings with low mass for…

by Lyon Lee, IDEC Product Marketing Manager IDEC switches, relays and PLCs: Safe, Simple, Smart push-in connections Coronavirus has caused an unprecedented disruption to all businesses and negatively affected the global workforce. OEM manufacturers are struggling to maintain production under severe shortages of skilled workers and forced to look for new ways to minimize the…

The AutomationDirect Productivity2000 PLC is a modular, rack-based system with a full lineup of discrete, analog and specialty I/O modules providing over 400 local I/O points. With remote expansion, over 4,000 total I/O points are available. Two new 4-channel analog input modules (from $159.00) provide 0-20 mA or 0-10 VDC inputs, and two new 4-channel…

Digi-Key Electronics, a global electronic components distributor, announced that it has expanded its product portfolio by signing a U.S. distribution partnership with ICP DAS USA, providing Digi-Key customers with some of the widest selection of communication converters of any offering, including the conversion of CAN bus, BACnet, DeviceNet, EtherCAT and many other common protocols. This…

Acromag introduces a new rugged, small form factor (SFF) embedded computer system with modular I/O for signal processing, communication, and control functions. The ARCX1100 is optimized for size, weight, power, and cost (SWaP-C) with a COM Express Type 10 CPU and four slots for Acromag’s plug-in AcroPack I/O modules. Overall size with an integrated removable…

Industrial automation solutions provider Omron Automation Americas has a new technology to help facilities get closer to the ultimate goal of zero downtime. By providing continuous, remote thermal monitoring of electrical panels and other components, Omron’s K6PM Thermal Condition Monitoring Device lowers the time and cost required for critical equipment inspections and minimizes the risk…

Higher amperage relay output modules and an 8-point input simulator module are now available from AutomationDirect for the CLICK series stackable micro brick PLCs. The CLICK C0-04TRS-10 ($54.00) is a 4-point, 10A per point, isolated relay output module with four Form A (SPST) relays and 4 isolated commons. Operating voltage range is 6-24 VDC /…

AutomationDirect’s STRIDE communication products provide reliable connectivity to industrial controllers and field devices. The STRIDE Field I/O family of modules provides a simple and economical means to connect inputs and outputs to a Modbus TCP communications network via Ethernet 10/100 Base-T. Each module operates as a standalone Modbus TCP server, and can be remotely configured…

Right after the recent release of three specialty input/output modules for the groov EPIC platform, Opto 22 has announced two more modules to close out the year. For system integrators and engineers, the new I/O modules provide more options for bringing field bus networks into groov EPIC, as well as meeting requirements for temperature control…

Using the IO-Link communication system to connect intelligent sensors and actuators to the controller significantly reduces the amount of time required. Sensors can connect quickly and without any errors using a pre-assembled cable, for example, while automated commissioning is also made possible by means of downloading parameter sets. Another advantage is IO-Link’s complete transparency right…

Opto 22 announces the release of three new groov EPIC input/output modules, further extending an already comprehensive industrial I/O portfolio. For system integrators and engineers, the new I/O modules provide more options for bringing existing devices into groov EPIC, as well as meeting precise requirements for temperature control applications. They also include budget-beating designs for…

The new Festo remote I/O system CPX-AP-I, which improves the performance of mixed valve terminals and I/O systems, is compatible with most communication protocols — including EtherNet/IP, PROFINET, and EtherCAT. These rugged, compact, and lightweight modules can be mounted directly on machines in IP65/IP67 rated environments. CPX-AP-I recently received a 2019 Reddot award for product…